Ariston AVXL 109 Installationsanleitung Handbuch - Seite 19
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Waschmaschine Ariston AVXL 109 herunter. Ariston AVXL 109 36 Seiten.
Seite drucken
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18).
The temperature can be lowered, or even set to a cold wash ( ).
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes
Maximum spin speed
Cottone
1000 rpm
Synthetics
800 rpm
Wool
600 rpm
Silk
no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
Delays the start
of the wash by
up to 9 hours.
Delay Timer
Allows for an
impeccable wash,
Super
visibly whiter
Wash
than a standard
Class A wash.
This option
reduces the
amount of
Easy iron
creasing on
fabrics, making
them easier to
iron.
Cuts the duration
of the wash cycle
Rapid
by 30%.
Comments
Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B.: Once you have pressed the Start/Reset button, the delay
can only be decreased if you wish to modify it.
This function is incompatible with the RAPID function.
When this function is set, programmes 6, 7, 8, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative
symbol
and press the START/RESET button.
This function is incompatible with the SUPER WASH function.
will flash.
GB
.
Enabled with
programmes:
All
1, 2, 3, 4, 5,
6, 7, 8.
All
programmes
except for
1, 2, 9, 10
and Draining.
1, 2, 3, 4, 5,
6, 7, 8
19