Pioneer SA-V220 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer SA-V220 herunter. Pioneer SA-V220 11 Seiten. Stereo mixing amplifier

Seite drucken

VCR SOURCE SELECTOR SENSITIVITY

switch

Switch

it for proper operation of the AUTO

SOURCE

SELECTOR function of the SA-V220. For the AUTO SOURCE

SELECTOR function, see page 10.

M_:Normal position

:s(When no LASER DISC signal is input.)

\f "TAPE/AUX' or "CABLE"

terminal

is automatically

selected even though VCR is being played, set to this

position "L" to select VCR.

(When no LASER DISC signal is input.)

If "TAPE/AUX" or "CABLE" is not selected even though

VCR finishes its playback, set to this position "H" to select

"TAPE/AUX' or "CABLE".

@ VCR MODE switch

This switch is used to select the VCR audio modes (MONO/

STEREO).

Connect aVCR with monophonic audio output either to "L" or

""R" AUDIO INPUT jack an set this switch to "MONO".

( TAPE/AUX VOLUME control

Controls the input sound level of devices connected to the

TAPE/AUX input jacks. This control is normally centered but

should be adjusted for LASER DISC.

SENSITIVITY switch

Switch

it for proper operation of the AUTO

SOURCE

SELECTOR function of the SA-V220. For the AUTO SOURCE

SELECTOR function, see page 10.

M_ :Normal position

:(When neither LASER DISC nor VCR signal is input.)

if "CABLE" is automatically selected even though "TAPE/

AUX" signal is being played, set to this position "L" to

select "TAPE/AUX'.

:(When neither LASER DISC nor VCR signal is input.)

lf AUTO

INPUT selector remains at "TAPE/AUX" even

though TAPE/AUX finishes its playback, set to this position

"H" to select "CABLE".

(2 TAPE/AUX MODE switch

This switch is used to select audio modes (MONO/STEREO)

of components connected to the TAPE/AUX input jacks.

Connect a component with monophonic audio output either

to"L" or *R* AUDIO INPUT jack and set this switch to "MONO".

@ CABLE VOLUME control

Controls the volume of the CABLE input jacks sound.

This control is normally centered but should be adjusted in

accordance with the volume of the LASER DISC.

PANEL FACILITIES

@® AUDIO INPUT jacks

LASER DISC

Connect to the AUDIO jacks of a LD player.

VCR

Connect to the AUDIO OUT jacks of a VCR.

CABLE

6 TAPE REC jacks

NOTES:

OFF.

* Sound of TAPE/AUX

will not be output from this jack in any case.

@ ADAPTOR IN/OUT jacks

4 GND (Ground) terminal

Always ground this unit to prevent electrical shock and to

avoid generating interference or noise in other equipment.

4 AC INLET jack