Ariston AVXXF129 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Ariston AVXXF129 herunter. Ariston AVXXF129 12 Seiten. Ariston instruction manual washing machine avxxf149, avxxf137, avxxf129

Seite drucken

Care and maintenance

Switching off the electricity

Turn off the water tap after every wash. This will

limit the wear of your appliances water system

and also prevent leaks.

Unplug your appliance when cleaning it and

during all maintenance operations.

Cleaning

Cleaning the exterior

Use a damp cloth or silicon polish to clean the exterior

surfaces of the appliance.

Cleaning the door bowl

Clean the internal surface of the door bowl regularly

with a soft cloth. A build up of soap powder and water

hardness residue may result in water leaking from the

door.

Cleaning the dispenser drawer and compartments

It is advisable to clean the dispenser drawer regularly.

! Do not try to clean any part of the dispenser drawer

while the machine is running.

1. Pull out the drawer until it reaches its stop.

4. Relocate the dispenser drawer and push it firmly

back into place.

! Do not clean any part of the machine with abrasive

cleaners, scouring agents, acids, any bleach or metal

polish as they may cause damage.

Press the drawer release

button to remoce the dispenser

drawer (see figure).

Clean and dry the dispenser

drawer, syphons, grate and

fabric conditioner exit channel

(A). Also regularly clean the out-

let pipe area (B).

Caring for your appliance door and

drum

Always leave the appliance door ajar to prevent

unpleasant odours from forming.

Checking the water inlet hose

Check the water inlet hose at least once a year. If you

see any cracks, replace it immediately: during the

wash cycles, high water pressure could cause a

cracked hose to split open.

! Never use hoses that have already been used.

Fuses

Your appliance comes fitted with a plug and a 13 amp

(13A) fuse. If you need to replace the fuse, use only

those rated at 13 amp (13A) and ASTA approved to

BS1362. To change the fuse, insert the fuse and push

the fuse holder down into the locked position. Correct

replacement is identified by colour coding or the

marking on base of the plug.

! DO NOT use the plug unless the fuse holder is in the

locked position and the top cover firmly replaced.