Pioneer VSA-700 Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Pioneer VSA-700 herunter. Pioneer VSA-700 30 Seiten. Av digital surround amplifier

Seite drucken

Operating

Instructions

MD PIONEER wncin wrmne amos ne ue

AV DIGITAL SURROUND AMPLIFIER

AMPLIFICATORE DIGITALE

AV DI CIRCONDAMENTO

VSA-70

Thank you for buying this Pioneer product. Please read through these operating instructions

so you will know how to operate your model properly. After you have finished reading the

instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes

differ from that shown in the explanatory drawings. However, the method of connecting and

operating the unit is the same.

WARNING:

to prevENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

IMPORTANT NOTICE

[For U.S. and Canadian models]

The serial number for this equipment is located on the

rear panel. Please

write this serial number

on your

enclosed warranty card and keep it in a secure area. This

is for your security.

[For Canadian model]

CAUTION: To prEvENT ELECTRIC SHOCK DO

NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT BLADE

EXPOSURE.

ATTENTION:

pour prevenin LES cHocs

ELECTRIQUES

PAS

UTILISER

CETTE

FICHE

POLARISSE AVEC UN PROLONGATEUR UNE PRISE DE

COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF

SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS

EN LAISSER AUCUNE PARTIE A DECOUVERT.

LINE VOLTAGE SELECTOR SWITCHES

Only multi voltage models are provided with these

switches, U.S.A., Canadian, U.K., Australia and Europe

models are not provided with them.

Mains voltages in Saudi Arabia are 127V and 220V only.

Never use this model set to 110V in Saudi Arabia.

You will find the line voltage selector switches on the rear panel.

Before your model is shipped from the factory, the switches

are

set to the

power

requirements

of the

destination;

nevertheless, you should check that they are set properly before

plugging the power cord into the wall outlet. If the voltage

requirements differ, adjust the selector switches as follows.

Before adjusting, disconnect the power cord.

Provide yourself with a medium size screwdriver.

Changing the position of switch A, B

Insert the screwdriver into the slot on the voltage selector and

adjust so that the tip of the slot points to the voltage value of

your area.

Changing the position of switch A, B

Set it to the power voltage of your area.

NOTE:

Both switches A and B must be set to the same voltage.

an Switch A

Switch B

ie o

nov

iS iar |

WY) PIONEER'

The future of sound and vision.