Pioneer VSP-200 Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer VSP-200 herunter. Pioneer VSP-200 15 Seiten. Av surround processor/amplifier
Seite drucken
REAR PANEL FACILITIES
(1) VIDEO input jacks
Connect to visual appliance's output jacks (audio, video)
(2 LDinput jacks
Connect to LOplayer's output jacks(audio, video)
@ TV input jacks
Connect to TV tuner's output jacks(audio, video)
@ VCR jacks
Connect to a VCR.
(3) VIDEO OUTITO MONITOR TV)jack
Connect to a monitor TV
(@) CENTER PRE OUT jack
When
using
the
center
speaker
with
another
amplifier,connect
this to the amplifier's audio input.And
when
using
the TV's
built-in
speakers
as the center
speaker,connect this to the TV's audio input
@ SUB WOOFER OUT jack
lf you want to boost the low frequencies,or you want to use
he unit ina 3D system,connect this to a sub woofer power
amplifier
@) FRONT PRE OUT jacks
When a separate power arnplifier is used to drive the front
speakers,connect the power amplifier to these jacks
( CENTER SPEAKER terminals
Connect the center speaker to these terminals Use center
speaker with impedance of BQto16Q
4 REAR SPEAKERS terminals
Connect
the rear speakers
to these terminals. Use rear
speakers with impedance of 8Qto16Q
1} CONTROL IN/OUT jacks
IN:
Connect this jack to other Pioneer
components(main unit or remote control unit)
when using those components to control this
out
OUT:
Connect this jack to other Pioneer components
when using the remote control of this unit to
control other components
NOTE:
The VSP-200's remote sensor does not function when a plug
is inserted in the IN jack. To operate, point the remote contro!
unit at the remote sensor on the compornent to which the
VSP-200's IN jack is connected.
VSP-200
Pioneer compornent
bearing the (i mark.
To the CONTROL
IN jack of the
Pioneer compornent bear
Remote control unit
ing the fil mark.
42 AC INLET
Connect power cord to here and on AC outlet of an audio
timer. If you are going to be away from home a long period of
time.disconnect the unit from wail socket.
7
<ARB1488>