Pioneer CDJ-500II Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CDJ-500II herunter. Pioneer CDJ-500II 16 Seiten. Compact disc player
Auch für Pioneer CDJ-500II: Service-Handbuch (6 seiten)

Seite drucken

APPLICATION OPERATION

Controlling This Unit from a DJ Mixer

By connecting the CONTROL jack of this unit with the

CONTROL jack of the optional DJM-500 or DJM-300

DJ mixer, the fader starting or back cuing of the player

can be controlled from the channel fader or cross-

fader of the mixer.

For the connection and operation, read the operating

instructions of the DJM-500 or DJM-300 DJ mixer.

MOUNTING RACK

÷ When using a commercially available 19-inch

standard rack (EIA) with a sliding shelf, use the

supplied screws and spacers for mounting the player

to the sliding shelf. The player's installation surface

board of the sliding shelf should be 1.6 mm ~ 2

mm thick.

Make 4 holes in the commercially available sliding

shelf.

Place the player with top panel down and remove

the screws of the foot. (Retain all screws.)

Put the sliding shelf on the player with the front

panel of the player and the front side of the sliding

shelf aligned.

Fix the sliding shelf to the player with the supplied

screws and spacers.

Caution for use of carrying case

When the CDJ-500II is used in a carrying case, be

careful for the following:

÷ During playback, use care so that the transportation

cushions do not contact the player, power cord or

audio cord; if vibration is transmitted through other

part than the feet of the product, sound skip may

occur.

Also be careful not to touch the

carrying case during playback.

290

Screw

Front side

260

4 - ø5

Unit : mm

3 4

Supplied screw

Foot

Supplied

spacer