Pioneer CLD-M301 Betriebsanleitung - Seite 32
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CLD-M301 herunter. Pioneer CLD-M301 40 Seiten. Multi-play cd cdv/ld player
Auch für Pioneer CLD-M301: Betriebsanleitung (40 seiten), Betriebsanleitung (40 seiten)
Seite drucken
Selected chapters (LD) or tracks (CDV/CD) can be played in
any desired order (max. 24 chapters or tracks).
Display with a disc containing a TOC
1 Press PGM.
3.0.12
PLAY
Total Time
Program
0 0.00
Step-1
Input disc No. --~-
@ You can view the state of programming on the monitor
TV screen.
2 Select the desired chapters or tracks.
:
With LDs, enter the number
of the desired chapter with the
digit buttons.
:
Example: To program chapter 9, 7 and 18 in that order:
If you make a mistake during entry:
Press CLEAR
and enter the correct number with the
digit buttons.
7
>
7
=>
FO
g
/)
/)
Screen display after programming is completed
PLAY
Program
ecm 4
3 Press b>.
<=
/7
To stop program play in the middie:
®
Press Bi on the front panel of the player or EJECT gi/& on the
remote control unit.
@
Press CLEAR on the remote control unit.
To clear the program contents:
@
Open the disc table.
@
Press CLEAR on the remote contro! unit in stop mode.
Programming a pause:
When recording on a cassette tape, a programmed pause allows
you to change the tape side or to record a blank section on the
tape which is useful for music search functions, etc.
When a program is in pause mode, pressing PAUSE Hf resumes disc
playback, so restart recording before pressing PAUSE i.
With CDs or CDV discs, first specify disc No. with the DISC NUMBER
buttons.
Example: To program CD track 9 on disc No. 2, all tracks on disc No.
3 and track 18 on disc No. 1:
A
Screen display after programming is completed
9
~) (ee
HD
&
3 0.32
PLAY
Total Time
Program
3.
Step- 4
@09 Da O18 m--~-
Input disc No. «= -
The chapters/tracks are played in the programmed order. When all
programmed chapters/tracks have been played, the player enters
stop mode.
To program a pause:
In step 2 of the above procedure, press PAUSE if instead of
entering a chapter or track number,
NOTE:
@
A pause
cannot
be programmed
for step
1, nor for two
consecutive steps.
@ A pause can be programmed for the last program step, however,
it will not be effective.
Programmed pause indication:
On the monitor screen ~ If
in the front panel display window — PA
To go to the previous or next chapter (track) in a program:
Press SKIP kd or B41 on the remote control unit.
To check the program contents
During program playback or in stop mode, press PGM to display
the prograrn contents on the monitor screen. When PGM is pressed
again, the program contents disappear.
32
<VRB1070>