Pioneer CMX-3000 Betriebsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CMX-3000 herunter. Pioneer CMX-3000 20 Seiten. Owner's manual
Auch für Pioneer CMX-3000: Betriebsanleitung (33 seiten)
Seite drucken
Read before use
PANEL FACILITIES
Player
1 Manual ejection hole (see p. 5)
2 Disc insertion slot (see p. 11)
When using 3 inch/8 cm discs, discs must be inserted in the
commercially available CD adapter before insertion.
3 Disc loading indicator
This indicator flashes when a disc is being inserted into or
ejected from the disc insertion slot and lights up when a disc
has been inserted.
4 EJECT button (0)
Pressing this button while cueing is on standby or play is
paused will eject the disc from the player.
Remote Control Unit
1 EJECT button (0)
2 CD TEXT/WAVE button
Each time the button is pressed the function changes
alternately as follows:
3 WAVE display
3 CD TEXT
disc title display
During digital mode, switches between
CD TEXT 2
disc title display
3 LOOP control buttons (*)
4 EMERGENCY LOOP button (*)
When this button is pressed, the current point is set as the
loop in-point, and loop play begins with an automatically set
out-point.
8
<DRB1307>
Operation buttons indicated by an asterisk (*) are not supported in
digital mode.
(see p. 16)
3 CD TEXT
track title display
3 CD TEXT
track title display
(see p. 16)
(see p. 16)
5 DIGITAL MODE switch (see p. 11)
Set to On when the digital output is to be used. When set to
On, the DJ functions do not function. (Functions marked * do
not operate in this mode.) And the muted pause mode is
used instead of the audible pause mode.
6 POWER switch and indicator
The following settings are maintained in the internal memory
even when the power is turned off:
÷ TEMPO RANGE
÷ AUTO CUE
÷ CD TEXT/WAVE
5 TEMPO controls (*)
Tempo control range button (TEMPO RANGE):
Pressing this button causes the variable range of the tempo
control slide to change each time the button is pressed.
MASTER TEMPO button and indicator:
Pressing this button causes the master tempo feature to be
powered on or off each time it is pressed.
Tempo control slide:
Moving this slider in the positive (+) direction away from the
center position (normal playback tempo) causes the tempo to
become faster, and moving it in the negative (–) direction
causes the tempo to become slower.
PITCH BEND buttons (+, –):
When pressed during playback, causes pitch bend. Pressing
the "+" button causes pitch to accelerate, while pressing the
"–" button causes pitch to decelerate.
÷ TIME MODE
÷ MASTER TEMPO
÷ AUTO CUE LEVEL
(see p. 13)