Pioneer CMX-5000 Betriebsanleitung - Seite 14
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CMX-5000 herunter. Pioneer CMX-5000 20 Seiten.
Seite drucken
Applications
SPECIAL DISC JOCKEY TECHNIQUES
LOOP IN/REALTIME CUE/OUT ADJUST
TRACK SEARCH (4, ¢)
SEARCH (1, ¡)
Five ways of using the jog dial
1. Using the jog dial during playback
÷ Rotating the jog dial during playback causes the speed to
be accelerated (when rotated in the FWD+ direction) or
slowed down (when rotated in the REV– direction) in
accordance with the degree to which the dial is turned.
÷ Once the jog dial is no longer being turned, playback
resumes at its original speed.
2. Using the jog dial while playback is being paused
(Frame searching)
÷ Rotating the jog dial causes the player to begin searching
in 1-frame units.
÷ Rotate the jog dial at a fixed speed in the FWD+ direction
for playback at normal speed.
3. Rotating the jog dial after pressing the SEARCH
button while waiting for cueing (Cueing point
search)
Pressing either of the SEARCH button (1, ¡) while
waiting for cueing causes the player to enter cueing pause
mode, and rotating the jog dial at this time causes the player
to search for possible cueing points. Pressing the CUE button
after the player has advanced or rewound to a new cueing
point will then cause the new cueing point to be entered into
memory.
4. Rotating the jog dial while pressing the SEARCH
button during playback (Super-fast searching)
Rotating the jog dial in the direction you wish to search while
pressing the forward or reverse SEARCH button (1, ¡)
will cause the player to enter high-speed search mode.
5. Rotating the jog dial while pressing the TRACK
SEARCH button (Super-fast track searching)
Turning the jog dial in the direction you wish to search while
pressing the forward or reverse TRACK SEARCH button
(4, ¢) will cause the player to enter high-speed track
search mode, with the direction and speed of searching
being adjusted in accordance with the direction and degree in
which the jog dial is turned.
Playing master tempos
1. During playback, press the MASTER TEMPO but-
ton.
÷ The MASTER TEMPO button and the MT indicator on the
display will light up.
14
<DRB1254>
LOOP OUT/EXIT
EJECT
IN/REALTIME CUE
0
OUT ADJUST
TRACK SEARCH
4
¢
SEARCH
1
¡
CUE
CUE
PLAY/PAUSE
6
PLAY/PAUSE
RELOOP
MASTER TEMPO
OUT EXIT
RELOOP
TIME MODE
TEMPO
LOOP
AUTO MIX PLAY
6/ 10/ 16
AUTO CUE
PLAY MODE SELECT
DISC
TRACK
MT
MASTER
TEMPO
A
TRACK
TEMPO
16
10
6
BPM
M
S
F
NEXT
REMAIN
A.CUE
0
1
2
3
4
5
6
7
BPM
8
9
10
11
12
13
14
15
16
17 18 19 20
INSTANT
LOOP
RELOOP
SHORT TIME CHANGE
CHANGE
REV
FWD
MIX MODE SELECT
Jog dial
Tempo control slide
2. Use the tempo control slide to change the playback
speed.
÷ Note that changing the tempo changes neither the key nor
pitch.
Loop playback
7 Defining a loop
1. Press the PLAY/PAUSE button (3/8) to begin
playback.
2. During playback, press the LOOP IN/REALTIME CUE
button at the point from which you wish to start the
loop.
¶ Note that this operation need not be performed if a
prerecorded cueing point is to be used as the start of
the loop.
3. During playback, press the LOOP OUT/EXIT button at
the point from which you wish to end the loop.
¶ Loop playback will begin, with playback looping from
the loop start point to the loop end point.
7 Stopping loop playback
During loop playback, press the LOOP OUT/EXIT button
or RELOOP button.
¶ Once this has been done, playback will continue in
sequence from the loop end point without returning to the
loop start point.
7 Changing the loop end point
1. During loop playback, press the LOOP IN button.
¶ The loop end point time will be displayed on the display
panel, the LOOP IN button will begin flashing rapidly,
and the LOOP OUT/EXIT button will be unlit.
2. Press the forward or reverse SEARCH button (1,
¡) or turn the JOG dial.
¶ The loop end point will be shifted forward or backward
in 1-frame units.
¶ Pressing the LOOP IN button or waiting for 30 seconds
or longer will cause the player to exit from update loop
input point mode and to resume loop playback.
7 Returning to loop playback
After loop playback has been stopped, press the RELOOP
button during playback to return to loop playback.
¶ The player will return to the currently defined loop start
point and begin loop playback (i.e., relooping) again from
that point.
Remote control unit
PROGRAM
CLEAR
PLAYER SELECT
B
BPM/TRACK
BPM/TRACK
PUSH ENTER
BPM SYNC
MIX TIME
SHORT TIME
MIN MAX