Pioneer CMX-5000 Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CMX-5000 herunter. Pioneer CMX-5000 20 Seiten.

Seite drucken

1. Connections

Read before use

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly.

After you have finished reading the instructions, put them away in a safe place for future reference.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

IMPOTANT SAFETY INSTRUCTIONS

READ INSTRUCTIONS — All the safety and operating

instructions should be read before the product is

operated.

RETAIN INSTRUCTIONS — The safety and operating

instructions should be retained for future reference.

HEED WARNINGS — All warnings on the product and in

the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS — All operating and use

instructions should be followed.

CLEANING — Unplug this product from the wall outlet

before cleaning. The product should be cleaned only

with a polishing cloth or a soft dry cloth. Never clean

with furniture wax, benzine, insecticides or other

volatile liquids since they may corrode the cabinet.

ATTACHMENTS — Do not use attachments not

recommended by the product manufacturer as they

may cause hazards.

WATER AND MOISTURE — Do not use this product near

water — for example, near a bathtub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or

near a swimming pool; and the like.

ACCESSORIES — Do not place this product on an

unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child or

adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the

product. Any mounting of the product should follow

the manufacturer's instructions, and should use a

mounting accessory recommended by the

manufacturer.

CART — A product and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the product and cart combination

to overturn.

VENTILATION — Slots and openings in the cabinet are

provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, and these openings must not be blocked

or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other

similar surface. This product should not be placed in

a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer's

instructions have been adhered to.

POWER SOURCES — This product should be operated

only from the type of power source indicated on the

marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or

local power company.

LOCATION — The appliance should be installed in a stable

location.

NONUSE PERIODS — The power cord of the appliance

should be unplugged from the outlet when left unused

for a long period of time.

CAUTION

÷ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

÷ The use of optical instruments with this product will increase eye hazard.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

GROUNDING OR POLARIZATION

If this product is equipped with a polarized alternating

current line plug (a plug having one blade wider than

the other), it will fit into the outlet only one way. This

is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

If this product is equipped with a three-wire grounding

type plug, a plug having a third (grounding) pin, it will

only fit into a grounding type power outlet. This is a

safety feature. If you are unable to insert the plug

into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of

the grounding type plug.

POWER-CORD PROTECTION — Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the product.

OUTDOOR ANTENNA GROUNDING — If an outside

antenna or cable system is connected to the product,

be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges

and built-up static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides information

with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements

for the grounding electrode. See Figure A.

LIGHTNING — For added protection for this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due

to lightning and power-line surges.

POWER LINES — An outside antenna system should not

be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be

taken to keep from touching such power lines or

circuits as contact with them might be fatal.

OVERLOADING — Do not overload wall outlets,

extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

NO USER-

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

OBJECT AND LIQUID ENTRY — Never push objects of

any kind into this product through openings as they

may touch dangerous voltage points or short-out parts

that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

SERVICING — Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE — Unplug this product

from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into

the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation.

If the product has been dropped or damaged in any

way.

When the product exhibits a distinct change in

performance — this indicates a need for service.

REPLACEMENT PARTS — When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or

have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

SAFETY CHECK — Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product

is in proper operating condition.

HEAT — The product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

FIG. A

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810 – 20)

GROUNDING CONDUCTORS

(NEC SECTION 810 – 21)