Pioneer PD-M423 Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer PD-M423 herunter. Pioneer PD-M423 16 Seiten. Multi-play compact disc player
Auch für Pioneer PD-M423: Service-Handbuch (44 seiten)

Seite drucken

TO PLAY ONLY DESIRED TRACKS/DISCS

1,42

PROGRAM

PD-M423 only PGM

DISC

PD-M423 only

DISC 1 DISC 2 DISC 3

r--1 r--l r--1

DISC NUMBER

DISC4

DISC5

DISC6

I--'1 i_11--'1

TRACK/MANUAL

PROGRAM

PD-M423 only

r-q

/'2

PGM

PLAY/PAUSE

EE)

F-2

PD-M423 only

1---1

I PROGRAM PLAYBACK - TO PROGRAM

TRACKS/DISCS

IN DESIRED ORDER

1. With

the player

stopped,

press the PROGRAM

button,

so that the PROGRAM

indicator

lights.

2. Use the DISC button

or one of the DISC NUMBER

buttons

to select the desired

disc number.

The selected disc number will be displayed.

3. Then, press the _

or _

button

select the desired

track.

The selected track number will be displayed.

4. Finally

press the PROGRAM

button,

or wait

for

about two seconds; the program

will be stored

memory.

If the PROG RAM button is pressed after selecting only the

disc number, the 'AL" indicator will appear, indicating se-

lection of the 'Disc All Program' mode (the entire contents

of the disc is entered into the program as a single step).

While the 'AL' indicator is displayed, however, if the 14_

<P< or _

button is used to designate a track number

and the PROGRAM button is then pressed (or after two

seconds elapses), the selected track will be stored as that

program step.

5. Repeat

steps 2, 3 and 4 to program

other tracks.

6. Press the I_/11 button.

The tracks are played in the programmed

order. When all

programmed

tracks have been played, the player enters

stop mode.

NOTE:

When a track is selected with the t44 _

or _,,_ _l

button

in step 3, the displayed track No. is automa tically programm ed

if the I_

or JH_ _

button is not pressed

within 2

seconds. Therefore, be sure to press the _

<P_ or

_lbutton

sequentially until the desired track No. appears on

the display.

To stop Program playback, Press the • button.

To exit program mode:

During program playback, select a DISC No. with the DISC

NUMBER button and then press the I_/11button. The player

enters normal playback mode and playback starts from the

beginning of the selected disc.

• Programs containing up to 32 steps can be created.

• To go to the previous or next step in a program, press the

P<< ,<_

or _

button.

• If the magazine is in the player, the program contents will

not be erased even if the power is turned off.

NOTE:

During Delete programming

the PROGRAM button cannot