Pioneer PDF904 Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer PDF904 herunter. Pioneer PDF904 20 Seiten. File-type compact disc player
Auch für Pioneer PDF904: Betriebsanleitung (22 seiten)

Seite drucken

[]

TO PLAY ONLYDESIRED TRACKS/DISCS

[]

PGM

c2z

I_SET

DISC

c2_

SET-_ I

TRACK

Repeat 2-3

i Disc all program

]

This operation can only be performed in stop mode.

If only disc No. is entered, and "AL"

appears on the display, all

tracks on the disc can be programmed.

•

Disc all program mode is cancelled when the track number is

entered.

•

Disc all programming

cannot be carried out during playback.

} Direct program

a Press the PGM button during normal playback.

During normal playback, the track being played can be programmed.

1. Press PGM to enter the program mode.

2 If you wish to program the track currently playing, press PGM

while the track is playing.

•

Direct programming

is not possible during program playback.

Program playback - To program tracks/discs

in desired order

You can perform

this operation

in either stop or playback mode.

However,

and _

cannot be used to select tracks during

playback. Be sure toselect stop or playback mode before programming

•

Pressing I_ when the program

indicator

is lit starts program

playback in the programmed order.

nPress

PGM on the remote control unit.

• The PGM indicator lights.

n Select the disc number which contains the track

to be programmed

with the digit buttons, and

then press the DISC SET button.

To program entire discs, enter the desired disc numbers

with

the digit buttons and DISC SET, and then go to step 4.

Make

sure that the player is in stop mode for Disc programming.

• When the DISC SET button is pressed, "AL" (all tracks) appears

on the display.

• When the disc number is programmed,

the PGM indicator, the

disc No. and the track No. blink.

• Only in stop mode, you can use the DISC -/+ buttons.

After

selecting the disc No., press DISC SET.

N Enter the track No. to be programmed with the

digit buttons and then press the TRACK SET

button.

Only in stop mode, you can use _

or _1.

After selecting the

track No., press TRACK SET.

• When the track number is programmed,

the PGM indicator, the

disc No. and the track No. blink.

[] Repeat steps 2 and 3 to program other tracks.

•Press

•

The tracks are played in the programmed

order.

NOTE:

When the disc number is selected with DISC-I+ in step 2, and when

the track is selected with _

or _

in step 3 in step mode, the

displayed disc No. or track No. is automaticafly programmed ifl<<

is not pressed within 2 seconds. There fore, be sure to press DISC

-/+ or I_,

sequentially

until the desired disc No. or track No.

appears on the display.

To stop Program playback, press II.

•

Programs containing up to 32 steps can be created.

•

The program contents

will not be erased even if the power is

turned off.

•

When DISC -/+ is pressed in the program playback mode, the

program

mode

is cancelled,

and the program

contents

are

cleared. The player searches for the disc in ALL mode.

•

When

the programmed

disc cannot be detected

in program

playback mode, or the programmed

track cannot be detected

after the TOC is read, that programmed

step is cancelled.

"*** - no" is displayed for about 3 seconds, and the next step is

played back.