Pioneer PDR-509 Betriebsanleitung - Seite 35

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer PDR-509 herunter. Pioneer PDR-509 40 Seiten. Compact disc recorder
Auch für Pioneer PDR-509: Service-Schaltpläne (23 seiten), Service-Handbuch (48 seiten), Service-Handbuch (23 seiten), Service-Handbuch (14 seiten)

Seite drucken
Pioneer PDR-509 Betriebsanleitung
ERASE
◊ÛB - .?/
INPUT
MONITOR
TIME
SELECTOR
Function indicator lights
when erasing
COMPACT DISC DIGITAL RECORDER
8
jog dial
DIGITAL
ANALOG
REC LEVEL
REC LEVEL
REPEAT
Î
FADER
FINALIZE
REC
DIGITAL
AUTO/
TRACK NO.
ERASE
SYNCHRO
MANUAL
WRITE
ERASE
7
8
3
TIME
8
4 ¢
1
¡
4
¢
INPUT
SKIP
SKIP ID
SELECTOR
PLAY
SET
CLEAR
1
2
3
4
5
6
7
8
Additional Recording Features
When a finalized disc is loaded:
1
Press ERASE.
The display shows
ERASE
blinks to indicate erase standby mode.
Press 7 (stop) to cancel erase here.
2
Use the jog dial or 4 and ¢ buttons on the
remote control to change the erase option.
Switch between:
– erase the table of contents (returns disc to a non-finalized state)
TOC
?
– erase all tracks
?
ALL
3
Press 8 (pause) to start erasing.
The function indicator lights and the display shows
time remaining to completion.
You can halt this erase process by holding down the 7 (stop) button
for 10 seconds.
Re-initializing a disc
1
Press and hold ERASE for about four seconds.
The recorder prompts you to confirm with the message
and the recorder function indicator blinks to indicate erase standby
mode.
Press 7 (stop) to cancel all disc erase here.
2
Press 8 (pause) to start erasing.
The process takes about five minutes plus the entire length of the disc.
During this time, the function indicator lights and the display shows dE
(disc erase), followed by the remaining time to completion.
You can halt this erase process by holding down the 7 (stop) button
for 10 seconds.
and
and the recorder function indicator
TOC
?
ERS
(erase), and the
?
ALL DISC ERASE
35