Pioneer PDR-509 Service-Handbuch - Seite 47

Blättern Sie online oder laden Sie pdf Service-Handbuch für CD-Spieler Pioneer PDR-509 herunter. Pioneer PDR-509 48 Seiten. Compact disc recorder
Auch für Pioneer PDR-509: Betriebsanleitung (40 seiten), Service-Schaltpläne (23 seiten), Service-Handbuch (23 seiten), Service-Handbuch (14 seiten)

Seite drucken

11.2 ABOUT FULL ERROR CODES

With the PDR-555RW, PDR-19RW, and PDR-V500, a full error

code is displayed on the FL display when you press the SKIP PLAY

key and MENU key simultaneously.

The full error codes are not backed up, and are cleared when the

power is turned off.

With the PDR-509, press the TIME and DISP OFF keys

simultaneously.

Display

The eight digits are displayed as shown below:

The values of each 2 digits for 1 to 4 (8 digits in total) are shown

below:

Two digits displayed for 1 :

The lower digit shows the operation when

the error is detected.

×0

: Unknown

×1

: Tray open

×2

: Tray close or open

×3

: SETUP (starting up a disc)

×4

: TOC, PMA read (including SETUP)

×5

: PLAY

×6

: SEARCH

×7

: REC/PAUSE

×8

: REC

×9

: LEAD OUT REC

×A

: TOC REC

×B

: PMA REC

×C

: Power calibration

×D

: TOC CHECK

×E

: ACTUAL PAUSE REC

×F

: Unknown

When "F1" is displayed in two digits for 2, the digits for 1 show

the number of the defective pin of the mechanism control.

Two digits displayed for 2 : Error Mode

Errors Generated in the Mechanism Control

Mode : Mode Name

No.

: Unfixed mode (inner condition unknown, upon

hardware reset)

: Invalid mode

: STOP

: Laser diode on (playback power)

: Focus ON

: Spindle ON

: Tracking ON

PDR-555RW, PDR-V500, PDR-19RW, PDR-509

: Direct sequence forward 1-track jump using DIRC

: Direct sequence reverse 1-track jump using DIRC

: Direct sequence forward 1-track jump repeat using DIRC

: Direct sequence reverse 1-track jump repeat using DIRC

: Auto sequence 10-track forward jump repeat

: Auto sequence 10-track reverse jump repeat

: Auto sequence 50-track forward jump repeat

: Auto sequence 50-track reverse jump repeat

: Auto sequence forward M-track movement

: Auto sequence reverse M-track movement

: PAUSE

: PLAY

: Seek track 0

: Blank search

: REC

: REC to PAUSE (REC END)

: ATIP TIME search

: Q-code TIME search

: Q-code track search

: Forward 300-track movement

: Reverse 300-track movement

: TOC area search

: Tray open

: Tray close

: Setup (→ PLAY)

: TOC read

: PLAY normal

: Search → PLAY

: REC. PAUSE

: Lead-out REC

: TOC (lead-in) REC

: PMA REC

: PCA REC

: TOC check

: Actual REC PAUSE

: Initializing

: 2-track jump setting in pause mode

: 1-track jump setting in pause mode

: Search → PAUSE

: PMA read

: Laser diode nominal recording power output

: Searching area with Q code

: Laser diode maximum recording power output

: Laser diode recording power continuous sweep mode

: Slider forward movement

: Slider reverse movement

: Calculating the track pitch and the line velocity of the disc

by measuring T0 and T1.

: Auto sequence 1-track forward jump

: Auto sequence 1-track reverse jump