Pioneer PDR-609 Betriebsanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer PDR-609 herunter. Pioneer PDR-609 44 Seiten. Compact disc recorder
Auch für Pioneer PDR-609: Betriebsanleitung (44 seiten)

Seite drucken

4 Getting Started

This generally allows just one generation of digital recording.

In other words, you can make a digital recording from an

original source (such as a commercial CD), but you can't

then make further digital recordings from that copy. Most

digital recording equipment uses the SCMS system, including

CD and MD recorders, and DAT decks. You may also find that

you can't record certain DVD discs as the digital output of the

DVD player can be disabled by the disc.

Of course, if you do encounter SCMS or other digital-copy

restrictions, you can always record through the analog inputs

of the PDR-609. To check whether a source is digital-copy

protected, see Checking for Digital Copy Protection on page

60.

Recording modes

The recorder is equipped with a set of analog input terminals,

as well as both optical and coaxial digital inputs. This means

that the PDR–609 is compatible with almost all audio

sources—analog or digital. It even has a built in sampling

rate converter making it ideal for recording DAT tapes or

satellite broadcasts, for example, which are often at sampling

rates different to that of CD. Since CDs are always recorded at

a sampling rate of 44.1kHz, sample rate conversion is

completely automatic—if the recorder senses a digital signal

at either 32 or 48kHz, it will convert it to 44.1kHz. Note that

this recorder can't convert 96kHz digital sources (such as

some DAT tapes and DVD discs).

Miscellaneous information

• The minimum recordable time is four seconds.

• Usually, track numbers are recorded onto the disc

automatically when recording. If you decide to switch off

this feature (for example, when you're recording from a

satellite broadcast), be sure to input track markers as

recording is taking place—you can't add them after

recording is complete. See pages 33 for more on manual

and automatic track numbering.

• The maximum number of tracks on a disc is 99.

Downloaded From Disc-Player.com Pioneer Manuals

Digital recording from DAT

If you're recording a DAT tape that was recorded using the

DAT machine's auto ID function, the IDs on the tape are

slightly after the beginning of the actual recording. This can

cause problems for the CD recorder:

• The start of the track may not be recorded.

• The track number will be recorded on the disc after the

start of the track.

• The beginning of the next track on the DAT is uninten-

tionally recorded.

To avoid these problems, we recommend recording start IDs

on the DAT manually, if possible. If this is not possible, or if

there are no start IDs on the DAT, we recommend using

manual track numbering while recording to CD to ensure

that new tracks are starting in the right places. Refer to the

instructions for your DAT recorder for more information.

You might also encounter problems if you try to synchro-

record all tracks from a DAT that is set to program play. If you

want to record a DAT in program play mode, use the 1-track

synchro recording mode—see pages 20 for how to do this.

Digital signal interruptions

Sources of signal interruption include power or source

component failure, accidental disconnection of the intercon-

nect cord, and interruption of digital satellite broadcasts. In

all these cases, if the signal resumes within about five seconds,

the result will just be a blank section on the disc. If the

interruption is longer than five seconds, the recorder displays

the error message:

DIN UNLOCK

Power interruptions

Never switch off the PDR-609 while it's recording, or while the

display shows

(Program Memory Area Recording).

PMA REC

If there's a power failure, or you accidently disconnect the

power from the wall outlet while recording is in process, you'll

lose at least part of the recording.

After recording, always remove the disc from the recorder

before switching the power off. Failure to do this could result

in you losing some of the recorded material on the disc.

and recording is paused.