Pioneer VP-1000 Betriebsanleitung - Seite 11
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer VP-1000 herunter. Pioneer VP-1000 16 Seiten. Laser disc player
Seite drucken
OPEARATION
NOTES:
•
When
the
CL V indicator
is
lit
(to
show
that
a extended play
d isc
is
be ing
played), the STILL/STEP, SLOW,
FAST,
and
FRAME NUMBER SEARCH
functions
do
not operate.
•
If
yo
u try to play the players without
a
disc
or if
the unreco rd·
ed side of a
laser
disc
is
installed facing down, spindle rotation
will stop
automatically,
and the
lid
la
tch will be released.
•
When
the player is used
for
the first
time,
adiust
the
fi
ne tun·
ing
control
on TV
set
for
best
picture quality.
•
If
the
player
fails
to respond to
command or continues to
ex·
hibit
an
unusual
cha racteristic,
push
off the PO WE R
switch.
Then
start
the operation
sequence
again
by pushing the
POWER
switch
followed
by
PLA
Y.
5)
When a laser disc program has
been
played to the end,
the laser pick·up automatically returns to the
beginning
of the program and play begins again. This function is
called
"auto·repeat".
STOPPING THE PLAYER
1)
Press the REJECT/OPEN key. It doesn't matter which
function mode the player is in when you press this key.
2) The laser disc will gradually
slow
down and stop. The
I id latch is
released
about 10
seconds after
the disc
comes to a stop.
3)
When commercial TV broadcasting is desired to be seen
or the player is not
in
use, please
switch
off the power of
the player.
SPECIAL FUNCTION FEATURES
PAUSE
Operation is interrupted at the point where you press the
PAUSE key, and the video picture disappears from the TV
screen. To get a picture again, press one of the function
keys (PAUSE, PLAY, FAST, SCAN, SLOW, STILL/STEP),
and operation will then be resumed. A red
indicator
lights
up
on
the PAUSE key during the pause mode.
AUDIO
All laser discs have two audio channels.
Both audio channels always turn on when the player's
power is turned on
.
The red indicators on both AUDIO
keys light up at the
same
time.
In special cases, such as bilingual program, you do not want
to reproduce both channels
simultaneously,
press either the
Li1
or
R
/
2 key to turn off the sound from the channel you
are not using. This will also turn off the
indicator
light on
the key. Press the
same
key again to turn on the
sound
from that
channel again;
the indicator will also come back
on.
NOTE:
Audio reproduction
is
only possible in
the
normal play mode.
Also, there w
ill
be
no sound
if
both audio key
indicators are
off.
When one audio
channel is in
u se the sound is fed to both audio
outputs.
FAST
X
3 (standard play disc only)
Press the right end of the FAST key,
as shown in
fig. 13, to
play the disc at three times the normal
speed
in the forward
direction. Press the left end of the key, as
shown
in fig.
14,
to play the disc
at
three times the normal speed in the reo
verse direction. Fast play continues for as long as you keep
pressing the key, and audio is not
reproduced.
The player returns to the previous mode when you release
the FAST key.
NOTE:
The FAST,
SCAN,
SLOW, and
STILL
/S
TEP keys are
rocker
type
switches,
so
they
will not operate
if
you
press the
center of
the
key.
Please do not press down
hard
on both
ends
of a key
at
once
since this
may damage the mechanism.
Fig. 13
Fig.
14
SCAN
This is for
quickly
finding a particular point in the program
from which you wish to play the disc. Scanning continues
in the forward direction for as long as
you
keep the right
end
of the SCAN key depressed. Scanning continues in the
reverse direction for as long as you keep the left end of the
key depressed. Audio is not reproduced during
scanning.
The player returns to the previous mode when you
release
the SCAI\J key
.
SLOW (standard play disc only)
Pressing the right end of the SLOW key will produce for·
ward slow motion. Pressing the left end of the
key
will
produce reverse
slow
motion
.
11