Pioneer DV-220V-K Betriebsanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebsanleitung für DVD-Spieler Pioneer DV-220V-K herunter. Pioneer DV-220V-K 26 Seiten. dvd player
Auch für Pioneer DV-220V-K: Spezifikationen (2 seiten), Betriebsanleitung (26 seiten)

Seite drucken

Additional information

Troubleshooting

 Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with

this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other

components and electrical appliances being used. If the trouble cannot be rectified after checking the items

below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

 The player may not operate properly due to static electricity or other external influences. In such cases, normal

operation may be restored by unplugging the power cord then plugging it back in.

General problems

Problem

Settings you have made have been

cleared.

Difference in volume between DVDs

and CDs.

Player cannot be operated with the

remote control.

Disc cannot be played or disc tray

opens automatically.

The player's power turns off auto-

matically.

Power turns on or off automatically.

Input of connected TV and AV sys-

tem switches automatically.

Picture is stretched, or aspect ratio

cannot be switched.

Check

Was the power cord unplugged forcibly

while the player's power was on?

This is not a problem with the player.

Are you operating from far away?

Is the remote control sensor exposed to

direct sunlight or strong artificial light

from a fluorescent bulb, etc.?

Are the batteries dead?

Is the disc scratched?

Is the disc dirty?

Is the disc properly set in the disc tray?

Does the disc have the right region

number?

Is the player placed in a humid loca-

tion?

Is Auto Power Off set to On?

Is KURO LINK set to On?

Is the aspect ratio properly set on the

connected TV?

Is TV Screen properly set?

Remedy

Be sure to press  STANDBY/ ON on the player's

front panel or press  STANDBY/ ON on the remote

control and wait for the OFF indicator on the front

panel display to turn off before unplugging the

power cord.

The volume may sound different due to differences

in how the signals are recorded on the disc.

Operate from within a distance of 7 meters from the

remote control sensor.

The remote control signals may not be received

properly if the remote control sensor is exposed

to direct sunlight or strong artificial light from a

fluorescent bulb, etc.

Replace the batteries (page 5).

Scratched discs may not play.

Wipe the dirt off the disc (page 24).

Set the disc with the printed side facing up.

Set the disc within the groove in the disc tray.

Discs with the region number "2 (including 2)" and

"ALL" can be played on this player.

There could be condensation inside. Wait a while

for the condensation to evaporate. Do not place the

player near an air-conditioner, etc. (page 23).

If Auto Power Off is set to On, the player's power

turns off automatically if no operation is performed

for over 30 minutes (page 15).

The player's power may turn on together with the

power of the TV connected to the HDMI OUT termi-

nal. If you do not want the player's power to turn on

when the TV's power is turned on, set KURO LINK

to Off (page 15).

The input of the TV, AV system (AV receiver or

amplifier, etc.) and HD AV Converter connected to

the HDMI OUT terminal may automatically switch

to the player when playback starts on the player or

the menu screen (Home Menu, etc.) is displayed. If

you do not want the inputs of the connected TV, AV

system (AV receiver or amplifier, etc.) and HD AV

Converter to switch automatically, set KURO LINK

to Off (page 15).

Refer to the TV's operating instructions and set the

TV's aspect ratio properly.

Set TV Screen properly (page 15).