Pioneer DV-300-S Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für DVD-Spieler Pioneer DV-300-S herunter. Pioneer DV-300-S 43 Seiten. dvd player

Seite drucken
Pioneer DV-300-S Betriebsanleitung
Connections
Connecting using the S-video

output

If your TV (or other equipment) has an S-video
(S1) input, you can use the S-video output on
this player instead of the standard (composite)
output for a better quality picture.
•
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV (or monitor or AV
receiver).
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
VIDEO OUT
AUDIO OUT
P
B
OPTICAL COAXIAL
P
Y
R
S-VIDEO
DIGITAL AUDIO OUT
OUT
COMPONENT VIDEO OUT
To S-video input
L
R
Connecting using the
component video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other
equipment). This should give you the best
quality picture from the three types of video
output available.
TV
AUDIO OUT
VIDEO OUT
P
B
P
Y
OPTICAL COAXIAL
S-VIDEO
R
DIGITAL AUDIO OUT
OUT
COMPONENT VIDEO OUT
•
Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
Watching progressive scan video
from the component video outputs
This player can output progressive scan video
from the component video output. Compared
to interlace video, progressive scan video
effectively doubles the scanning rate of the
picture, resulting in a very stable, flicker-free
image.
To set up the player for use with a progressive
scan TV, see Video Output settings on page 33.
When the player is set to output progressive
scan video, the PRGSVE indicator lights in the
front panel display.
Important
• When Component Out (page 33) is set to
Progressive, there is no video output from
the VIDEO OUT (composite) and S-VIDEO
OUT (S-video) jacks.
• If you want to display video on more than
one monitor simultaneously, make sure
the player is set to Interlace.
To component
video input
L
R
02
11
En