Pioneer PDP-S20-LR Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lautsprechersystem Pioneer PDP-S20-LR herunter. Pioneer PDP-S20-LR 33 Seiten.

INSTALLATION ON THE PLASMA

DISPLAY

CAUTION:

Attach the plasma display to the stand before installing

the speakers. See the Operating Instructions packed to-

gether with the stand for how to assemble the stand.

The illustrations show the holder for flush mounting, but

the explanations apply also for set back mounting.

Perform installation according to the following steps 1 to 2.

1 Attach the mounting fittings to the

speakers.

The illustration below shows the right speaker.

1 Align the convex portion of the holder for installing the

speakers on the right and left sides with the concave

portion of the speakers.

2 Fix the two points with screws.

3 Attach holders to the top and bottom of one speaker.

4 Similarly, attach two holders to

the top and bottom of the other

speaker.

2 Attach the speakers to the display.

The illustration below shows how to attach of the right speaker.

1 Fix the upper screw temporarily in advance to hang the

speaker on the display (In this case, leave a space of about

5 mm between the head of the screw and the display).

The display

5mm

2 Hang the speaker on the upper screw.

3 Fix the lower screw temporarily.

4 Adjust the position of the speaker and then fix the upper

and lower screws firmly.

5 Attach the left speaker following the same procedure as

described above.

NOTE:

÷ When the display is to be moved after speaker

installation, do not hold the display by the speakers. Hold

the display with one hand on the bottom of the unit and

the other on the handle on the rear. Do not hold the

speakers and raise the display. This may cause the

deformation or damage of products.

English