Pioneer S-ES21-LR-T Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lautsprechersystem Pioneer S-ES21-LR-T herunter. Pioneer S-ES21-LR-T 17 Seiten.

Seite drucken

STANDARD SURROUND SETUP

This is a standard multichannel surround sound speaker

setup for optimal 5.1 channel home theater sound.

Front

left

Surround left

MAKING AMPLIFIER SETTINGS

Before connecting the speakers, please read the

operating instructions supplied with your amplifier to

select the speaker setting of amplifier :

• FRONT SPEAKERS : LARGE

CONNECTING YOUR SYSTEM

Make sure all equipment is turned off before making any

connections.

• Correct wiring of your speakers is essential for

achieving the best sound quality. Be careful to

ensure proper polarity of connection.

CAUTION

These speaker terminals carry HAZARDOUS LIVE

voltage. To prevent the risk of electric shock when

connecting or disconnecting the speaker cables,

disconnect the power cord before touching any

uninsulated parts.

Connect to the speaker terminals on the rear of

the amplifier.

Connect the red marked speaker cord to the red (+)

terminal and the other cord to the black (–) terminal as

shown below (for more details, refer to your amplifier

instruction manual).

After connecting the plugs, pull lightly on the cords to

make sure that the ends of the cords are securely con-

nected to the terminals. Poor connections can create

noise and interruptions in the sound.

Center

Listening position

Surround right

D3-4-2-2-3_A1_En

Front

right

Connect to the speaker terminals on the rear of

the speakers.

Unscrew the terminals on the speaker and insert the red

marked speaker cord into the red (+) terminal and the

Subwoofer

other cord into the black (–) terminal as shown below.

(not supplied)

Black

SECURING THE FRONT SPEAKERS

• Pass a commercially-available reinforced string

through the plastic catch to securely support the

speaker to the wall. Be sure that the wall to which you

fasten the speaker is strong enough to support the

weight of the speaker. After fastening the speaker,

make sure that it does not fall over.

• The speaker can incur damage in the event of a fall.

• Do not attach the plastic catch directly to the wall. It

should only be used in conjunction with reinforced

string to prevent the speaker from falling.

Pass and tie two reinforced strings through the plastic

catch, and fasten the speaker to the wall as shown above.

• If you are unsure of the quality and strength of the

walls, consult a professional for advice.

• Pioneer is not responsible for any accidents or

damage that result from improper installation.

Amplifier

Red

Red marked half of speaker cord

Other half of speaker cord

Reinforced strings

Backside of speaker

Speakers

Plastic catch