Pioneer S-ES3TB Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lautsprechersystem Pioneer S-ES3TB herunter. Pioneer S-ES3TB 21 Seiten.

Seite drucken
CENTER SPEAKER
The speaker should be positioned below the TV. For best
results align the front of the speaker with the front of the
TV. If the speaker is placed under the TV and very close to
the floor, then tilting upwards may be beneficial.
Do not place the center speaker on top of TV, the speaker
may fall from the TV due to external shocks such as
earthquakes, endangering those nearby or damaging the
speaker.
SURROUND SPEAKERS
For best results the speakers should be positioned at or
above ear level. Depending upon your room layout and
preferences, the left and right rear speakers should be
positioned on the side walls just the rear of the listening
position, or on the walls.
STANDARD SURROUND SETUP
This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front
left
Listening position
Surround left
NON-SKID PADS
If the front, center and surround speakers are placed on
a hard surface, such as wood or tile place four non-skid
pads on the bottom flat surface of the speakers.
Center speaker
MAKING AMPLIFIER SETTINGS
Before connecting the speakers, please read the
operating instructions supplied with your amplifier to
select the speaker setting of amplifier :
• FRONT SPEAKERS : LARGE
• CENTER / SURROUND SPEAKERS : SMALL
2
En
Front
right
Center
Subwoofer
Surround right
Surround speakers

CONNECTING YOUR SYSTEM

Make sure all equipment is turned off before making any
connections.
• Correct wiring of your speakers is essential for
achieving the best sound quality. Be careful to
ensure proper polarity of connection.
CAUTION
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Connect to the speaker terminals on the rear of
the amplifier.
Connect the striped speaker cord to the red (+) terminal
and the other cord to the black (–) terminal as shown
below (for more details, refer to your amplifier instruction
manual).
Amplifier
Connect to the speaker terminals on the rear of
the speakers.
• For front speakers:
Unscrew the terminals on the speaker and insert the
striped speaker cord into the red (+) terminal and the
other cord into the black (–) terminal as shown below.
Black
Other half of speaker cord
• For all other speakers:
To connect, press the lever and insert the striped
speaker cord into the red (+) terminal and the other
cord into the black (–) terminal as shown below.
Black
Other half of
speaker cord
D3-4-2-2-3_A1_En
Speakers
Red
Striped half of speaker cord
Red
Striped half of
speaker cord