Pioneer S-RS7TB Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lautsprechersystem Pioneer S-RS7TB herunter. Pioneer S-RS7TB 13 Seiten. Pioneer speaker system user manual
Auch für Pioneer S-RS7TB: Katalog (8 seiten)

Seite drucken

Connect to the speaker terminals on the rear of

the speakers.

• For S-RS7TB front speakers:

Unscrew the terminals on the speaker and insert the

striped speaker wire into the red (+) terminal and the

other wire into the black (–) terminal as shown below.

Other half of speaker cable

• For all other speakers:

To connect, insert the striped speaker wire into the

red (+) terminal and the other wire into the black (–)

terminal as shown below.

red

black

Other half of speaker cable

WALL-MOUNTING THE SURROUND

SPEAKERS

Before mounting

• Remember that the speaker system is heavy and that

its weight could cause the screws to work loose, or

the wall material to fail to support it, resulting in the

speaker falling. Make sure that the wall you intend to

mount the speakers on is strong enough to support

them. Do not mount on plywood or soft surface walls.

• Mounting screws are not supplied. Use screws

suitable for the wall material and support the weight

of the speaker.

Striped half of speaker cable

Mounting screw

(not supplied)

5 mm to 7 mm

• If you are unsure of the quality and strength of the

walls, consult a professional for advice.

• Pioneer is not responsible for any accidents or

damage that result from improper installation.

SECURING THE FRONT SPEAKERS

• Using the included screw, tightly secure the metal

catch to the backside of the speaker.

• Pass a commercially-available reinforced string

through the metal catch to securely support the

speaker to the wall. Be sure that the wall to which you

fasten the speaker is strong enough to support the

weight of the speaker. After fastening the speaker,

make sure that it does not fall over.

• The speaker can incur damage in the event of a fall.

• Do not attach the metal catch directly to the wall. It

should only be used in conjunction with reinforced

string to prevent the speaker from falling.

Reinforced strings

Pass two reinforced strings through the metal catches,

and fasten the speaker to the wall as shown above.

5 mm

10 mm

Metal catches

Backside of speaker