Pioneer PDP-42A3HD Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Monitor Pioneer PDP-42A3HD herunter. Pioneer PDP-42A3HD 47 Seiten. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Auch für Pioneer PDP-42A3HD: Schnellreferenz-Teilelisten (12 seiten)

Seite drucken

05 Preparation

Preparation

Installing the Plasma Display

Over 10

cm (3

inches)

Locating

• Avoid direct sunlight. Maintain adequate ventilation.

• Because the Plasma Display is heavy, be sure to have

someone help you when moving it.

• If you place anything on the top of the Plasma Display it will not

receive enough ventilation and will not operate properly.

• Allow enough space around the upper and back parts when

installing to ensure ventilation around the backside.

Operating Environment

Operating environment temperature and humidity: +0°C to

+40°C (+32°F to +104°F); less than 80% RH (cooling vents not

blocked)

Avoid installing at the following locations:

• Under direct exposure to sunlight

• Under strong artificial light

• In high humidity

• Poorly ventilated

06-PDP42A3HD-Eng (15-18)

Over 50 cm (19

inches)

Preventing the Plasma Display from

Falling Over

Be sure to take special care to ensure that the Plasma

Display will not fall over.

Using a wall for stabilization

Attach the supplied falling prevention bolts (hooks) to the

Plasma Display.

Use storing cords or chains to stabilize the Plasma

Display appropriately and firmly to a wall, pillar, or other

study element.

• Perform this work in the same way for both the left and

right sides.

• Use ropes, chains and fittings that are available on the

market.

1 Hook

2 Cord or chain

3 Fitting

• A table or an area of the floor with adequate strength should

always be used to support the Plasma Display. Failure to do

so could result in personal injury and physical damage.

• When installing the Plasma Display, please take the neces-

sary safety measures to prevent it from falling or overturning

in case of emergencies, such as earthquakes, or of acci-

dents.

• If you do not take these precautions, the Plasma Display

could fall down and cause injury.

• The screws, hooks, chains and other fittings that you use to

secure the Plasma Display to prevent it from overturning will

vary according to the composition and thickness of the

surface to which it will be attached.

• Select the appropriate screws, hooks, chains and other

fittings after first inspecting the surface carefully to deter-

mine its thickness and composition and after consulting a

professional installer if necessary.

05.4.20, 4:30 PM