Ariston LFP 5P31 WLT X Gebrauchsanweisung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung Handbuch für Geschirrspüler Ariston LFP 5P31 WLT X herunter. Ariston LFP 5P31 WLT X 45 Seiten.

Seite drucken

OPTIONS AND SETTINGS

With each cycle additional options can be used. A full list of available options working with specific cycles can be found in the Cycles Table on

the previous page. All active options are shown on the display.

To set an option press „OK" button.

option list. Press „OK" to select the option, in the setting menu the LED above „OK" button is lit.

If the option is not available, it will be still visible in its position but with „

3D ZONE WASH

Option works with one rack at once. In particular, we recommend to

use it with Mixed and Intensive cycles - thanks to the additional 3D

water jets placed on the bottom o the cavity, ZONE WASH 3D option

allows to save energy or to increase the washing performance of the

dishwasher:

• 3D ZONE WASH + MIXED CYCLE: it allows to reduce energy

consumption up to 40%.

• 3D ZONE WASH + INTENSIVE CYCLE: it increases the washing

performances up to 40%. Ideal for very soiled mixed loads, e.g. pans

and saucepans, dishes with heavy encrustation or difficult-to-clean

crockery (grater, vegetable mill, dirty cutlery).

How to activate the option:

1. Select a compatible cycle.

2. Press

button to activate/deactive the option: a basket icon will

blink for a few seconds.

3D WASH

ACTIVATED

3. It is possible to change the selected rack pressing the ZONE WASH

button.

4. Remember to load the crockery in the selected rack only.

ZONE WASH

If there are not many dishes to be washed it can be loaded in one rack

only. Using this option you can select which rack you want to wash.

Select a compatible cycle (see "Cycles table"), and then press the ZONE

WASH

button: the symbol of the chosen rack will appear on the

display.

By default the ZONE WASH is not active and all racks icons are lit.

Selected only lower rack

Selected only upper rack

Selected only cutlery rack

Remember to load the upper or lower rack only, and to reduce the

amount of detergent accordingly. If upper rack is removed, please

apply detergent directly to tub instead of detergent dispenser.

TABLET (All-in-one)

This setting allows you to optimise the performance of the cycle

according to the type of detergent used. Enable it if you use combined

detergents in tablet form (rinse aid, salt and detergent in 1 dose).

TABLET

OFF

TABLET

message is shown for a few seconds. Then use „<" or „>" button to navigate through the

SET OPTIONS

3D WASH

DEACTIVATED

To set the Tablet, enter in the setting

menu by pressing „OK" button and

navigate with „< , >" until „TABLET" is

shown, then press „OK" button.

START DELAY

The start of the cycle may be delayed for a selected period of time.

To set a delay, enter in the setting menu by pressing „OK" button and na-

vigate with „< , >" until „START DELAY" is shown, then press „OK" button.

With each press of the button ">" or "<", the delay start increases by:

• every 0:30 if selection below 4 hours,

• every 1:00 if selection is below 12 hours,

• every 2 hours if selection is above 12 hours.

START DELAY

OFF

OFF

4:00

4:00

To remove the delay, press „<" or „>" button until „OFF" is displayed.

TURBO

This option can be used to reduce the duration of the main cycles

while maintaining washing and drying performance levels.

TURBO

OFF

TURBO

EXTRA DRY

This option allows to improve the drying of the dishes using higher

temperature during the final rinse and an extended drying phase.

The EXTRA DRY option results in the lengthening of the wash cycle.

EXTRA DRY

OFF

EXTRA DRY

KEYLOCK

KEYLOCK ACTIVATED

PRESS „OK" FOR 3 SEC.

KEEP PRESSED...

KEYLOCK DEACTIVATED

Once set, to deactivate it keep pressing „OK" button for a few seconds.

TUB LIGHT

When the feature is active the LEDs in the tub are automatically swit-

ched on/off as soon as the user open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in the

tub switch off (to turn them on again, the door has to be closed and

opened again).This feature is active by default, but it is possible to

deactivate it in the "SETTINGS MENU".

Default value is OFF.

If delay is selected, the

is lit.

Once „OK" button is pressed the

delay is confirmed and the machine

comes back to the cycle selection

screen with delay value visible.

Press „START/PAUSE"

button to

start the delay.

To set the Turbo, enter in the setting

menu by pressing „OK" button and

navigate with „< , >" until „TURBO" is

shown, then press „OK" button.

With each press of the button „>" or

„<" option will be ON or OFF.

Confirm by pressing „OK" button.

To set the Extra Dry, enter in the

setting menu by pressing „OK" button

and navigate with „< , >" until

„EXTRA DRY" is shown, then press

„OK" button.

With each press of the button „>" or

„<" option will be ON or OFF.

Confirm by pressing „OK" button.

The KEYLOCK function blocks the

control panel except the „ON/OFF"

button.

To activate the Keylock, enter in the

setting menu by pressing „OK" button

and navigate with „< , >" until

„KEYLOCK" is shown, then press OK.