3Com Etherlink 3C905B-TX Kurzanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Kurzanleitung für Netzwerkkarte 3Com Etherlink 3C905B-TX herunter. 3Com Etherlink 3C905B-TX 12 Seiten. Etherlink pci network interface cards
Auch für 3Com Etherlink 3C905B-TX: Kurzanleitung (15 seiten), Kurzanleitung (12 seiten)
Seite drucken
Windows 95
This section describes how to install the network driver
when your PC is running Windows 95.
You need the Windows 95 system installation files to
complete the installation. If Windows 95 is not installed, or
if you are replacing an installed NIC, see the user guide for
more information.
To install the network driver in a PC running Windows 95:
1 Make sure that the NIC is installed and is connected
to the network, as described earlier.
2 Restart the PC.
Windows 95 automatically detects the NIC in the PC.
3 Select Driver from disk provided by the hardware
manufacturer and click OK.
4 Insert EtherDisk diskette 2 in your drive, and if the
diskette is in drive A, click OK.
Otherwise, supply the correct drive letter and then click OK.
Once the 3Com installation files are read, Windows 95
prompts you for the Windows 95 network installation files.
5 Enter the location of the Windows 95 files (CAB files),
and click OK.
If Windows prompts you to reboot, click Yes. The driver
installation is complete.
Confirming Installation
To confirm that the 3C905B-TX NIC is properly installed in a
PC running Windows 95:
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon.
The System Properties box appears.
Windows 95
5