Aeotec Doorbell 6 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Aeotec Doorbell 6 herunter. Aeotec Doorbell 6 3 Seiten.
Auch für Aeotec Doorbell 6: Benutzerhandbuch (7 seiten)
Seite drucken
3.9.2019
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be
dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be held responsible for
any loss or damage resulting from not following any instructions in this guide or in other materials.
Button offers IP55 water protection and is suitable for outdoor use without direct exposure to heavy and penetrative rain. Button is
constructed with nylon; keep away from heat and do not expose to flame. Avoid exposing Button to direct sunlight where possible
in order to avoid UV damage and reduced battery performance.
Keep product and batteries away from open flames and extreme heat. Avoid direct sun light or heat exposure. Always remove all
batteries from products that are being stored and not used. Batteries may damage the appliance if they leak. Do not use
rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use may damage the product.
Contains small parts; keep away from children.
Quick Start.
Getting your Button up and running is as simple as pairing it to your Siren 6 or Doorbell 6. The following instructions tell you how
to link your Button to your Siren 6 or Doorbell 6.
Power up Button.
1. Open battery cover of Button.
2. Insert CR2450 battery into Button.
3. Lock the battery cover into place.
4. Tap Doorbell once and ensure that the LED blinks once.
Pair Button to Siren/Doorbell 6.
1. Tap Action Button of Siren 6 or Doorbell 6 3x times quickly.
2. Ensure that LED of Siren/Doorbell 6 is blinking slowly.
3. Tap Button 3x times quickly.
If successful, Siren/Doorbell 6 blinking will stop.
Install Button.
1. Select installation location for Button.
2. Test Button in location before installing to ensure Button communication reaches Siren/Doorbell 6. If Button does not
trigger Siren/Doorbell 6, select a different location for installation.
3. Affix the Mounting Plate of Button using 2x 20mm screws or use double-sided tape.
4. Lock Button to Mounting Plate.
Advanced.
Installing multiple Buttons to Siren/Doorbell 6.
Siren 6 or Doorbell 6 allows up to 3 separate buttons to be installed, it is possible to overwrite a current Button installed, or install
a 2nd or 3rd Button to control the same device.
https://aeotec.freshdesk.com/support/solutions/articles/6000202225-button-user-guide-
Button User Guide : Aeotec Group
2/3