Aeotec TriSensor Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Aeotec TriSensor herunter. Aeotec TriSensor 18 Seiten.

29-1-2019

Please note that when installed outdoors of your home, your TriSensor should only be relied on for temperature and

light where as the motion sensing capabilities should be disabled on your gateway in order to avoid false motion

readings. If selecting an outdoor location, it's important to position your TriSensor in a sheltered location. It is best if

your TriSensor is not directly exposed to rain, snow, or other elements.

If you wish to use TriSensor outdoors, you will need to lower settings, and angle TriSensor accordingly as all

environments will require different solutions or different settings for the motion sensor to work properly. Parameter 3

[1 byte] will determine the sensitivity of the motion sensor from a value range of 0 disabled to 11 max sensitivity

(your ability to configure this setting will depend on the gateway used).

It is advised that if you are seeing false motion tracking, run trial and error to determine the best sensitivity from a

range of 0 - 11 by going down 1 sensitivity level after every test (first 5, 4, 3, 2, then 1), while setting Parameter 3 [2

byte] to 5 to allow a PIR sensor timeout of 5 seconds after detecting motion to rapidly determine the best settings for

motion use outdoors.

Physically install your TriSensor.

With your TriSensor now a part of your Z-Wave network and having determined its installation location, it's time to finish

its physical installation. There are 2 ways that your TriSensor can be mounted on a wall or ceiling. Most simply it can be

placed upon a shelf without the need to attach further accessories. You can mount your sensor in a corner or against a

wall or ceiling by using the Back-Mount Plate. It's also possible to embed your TriSensor within a ceiling or wall using

its Recessor accessory (sold separately).

To install your TriSensor;

Reattach the three parts of your TriSensor to each other. Unlock the Battery Cover from the Sensor unit.

You may also install your TriSensor on any flat surface area such as tables, and bookshelves;

You can place it upon a shelf without the need to attach further accessories.

https://aeotec.freshdesk.com/support/solutions/articles/6000195459-trisensor-user-guide-

TriSensor user guide. : Aeotec

5/18