Dingo Tools 52CC Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gestrüppschneider Dingo Tools 52CC herunter. Dingo Tools 52CC 11 Seiten. Duo power plus
Auch für Dingo Tools 52CC: Benutzerhandbuch (16 seiten)

Seite drucken

CUTTING OPERATION

Always Cut by Guiding the head from your right to left.

Adjust the idle speed (see page X) for different types of grass you cut e.g cut tough shrubs or weeds at a high idle, and young

grass at a middle speed.

A metal blade cut best up to the point 1/3 from the edge. Use that area for cutting shrubs, tough and thick weeds. For cutting

young grass, you can use up to 2/3 from the tip of the blade.

MAINTENANCE OF MACHINE

Gear Case

Please Supply Multi-purpose grease at every 25 hours of use. Remove the cutter holders to arrange for old grease to exsist.

Maitenance Before Storage

Brushing off dirt from the machine, check damage or slack of each part. If you ﬁ nd out abnormalities,

repair them for the next use.

Extract fuel from the tank, and loose the drain screw of the ﬂ oat cabin to extract fuel, turn on the engine, and leave it running

until it stops naturally.

Remove the spark plug and put in 1-2cc of 2 cycle oil in the engine. Draw the starter 2-3 times, set the plug back and stop it at

the contaction position.

Apply anti-rust oil to the metal parts such as the throttle wire, put the cover on the blade, and keep it indoor avoiding dampness.

PLEASE BE AWARE THAT THE CUTTING ATTACHMENTS CAN CONTINUE ROTATING AFTER THE ENGINE IS

SWITCHED OFF! SO PLEASE WATCH OUT FOR THIS. WE RECOMMEND USING 20:1 UNLEADED FUEL TO OIL

MIXTURE FOR THIS BRUSHCUTTER.