Ariston SB35E-VN Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Warmwasserbereiter Ariston SB35E-VN herunter. Ariston SB35E-VN 20 Seiten. Electric instant water heater
Starting
IMPORTANT:
THE HEATER TANK MUST BE FILLED UP WITH WATER BEFORE TURN
ON THE ELECTRICITY SUPPLY THIS IS TO PREVENT ANY DRY BURNT
DAMAGE TO THE HEATING ELEMENT.
SHOULD TURN OFF THE HEATER BEFORE TURN OFF THE STOP VALVE.
OTHERWISE, IT WILL COME OUT A PERIOD OF HOT WATER IFRESTART
THE HEATER IN SHORT TIME, OR CAUSE CONFUSION ON OPERATION
LOGIC DUE TO SPECIAL DESIGN.
1. Turn on the water supply and the stop valve, and then wait until the water flow
through the hand shower.
2. Switch on the electrical supply.
3. Rotate clockwise the Knob, the HEATING lamp will light up; the hot water will
come out in a few seconds. The higher the temperature indicator position, the
hotter is the shower.
4. The outlet temperature may not be able to reach the setting temperature if
the incoming water supply from the mains is too cold or the flow rate is too high.
In this case, you can reduce the water flow rate which will lead to increase the
outlet temperature, but it is still not necessarily able to reach the setting
temperature in case the water supply really cold.
5. Totally 3 degrees for different power rate, the bigger of the number the higher
of the power. Rotate the knob to 0 to turn off the heater.
The outlet temperature might be unstable if the inlet water pressure or the voltage
change sharply.
5