Aeotec Dual Nano Switch ZW132 Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Aeotec Dual Nano Switch ZW132 herunter. Aeotec Dual Nano Switch ZW132 15 Seiten.
Seite drucken8-7-2019
- Swipe up gesture - turn on lights.
- Swipe down gesture - turn off lights.
Touch panel control (WallSwipe for Nano).
As you can see that the Dual Nano Switch's surface has a pin port, this port is used to connect the Touch panel. When you have already connected it to the Dual Nano Switch,
you will be possible to control the Dual Nano Switch through the Touch panel directly.
Monitoring Energy Consumption. (ZW132 Model only)
The Aeotec Dual Dual Nano Switch can report wattage energy usage or kWh energy usage to a Z-Wave control point when requested. If this function is supported by the
control points, the energy consumption will be displayed in the user interface of the control points. (The specific Z-Wave commands supporting energy monitoring are the Meter
Command Class. Automatic reports are sent to association group 1, which is setup via the Association Command Class.) Please consult the operation manual for these
control points for specific instructions on monitoring the Dual Nano Switch.
Note: The model ZW140 Dual Nano Switch does not have the ability to monitor energy consumption. The model ZW132 Dual Nano Switch supports the energy metering
feature and you can see the words "with Energy Metering" on its packaging box.
Security or Non-security feature of your Dual Nano Switch in Z-Wave network.
Including Dual Nano Switch as a non-secure device:
https://aeotec.freshdesk.com/support/solutions/articles/6000178928-dual-nano-switch-user-guide-zw132-and-zw140-
Dual Nano Switch user guide : Aeotec Group
14/15