Ariston 41-116-07 Installationsanleitung Handbuch - Seite 30

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Boiler Ariston 41-116-07 herunter. Ariston 41-116-07 48 Seiten. Microsystem

Seite drucken

3. Remove screw "H" (F

4. Gently slide the electrode downward (F

. 1.14

To replace, repeat the steps in reverse order, paying

particular attention to the following:

a - Centre the electrode in the positioning hole carefully,

otherwise the electrode may break;

b -Ensure that the left hand and right hand electrodes are

located the correct way round (facing each other), to

give the correct spark gap;

c - Check that the cables have been connected correctly;

d -Check that the rubber gasket covers the cable/ electrode

connection point completely.

. 1.14);

. 1.15).

1.3.4 Removing the main heat exchanger

1. Drain the boiler of water;

2. Release the overheat thermostat sensor "I" (F

3. Release the two connection nuts "J" connecting the

exchanger to the flow and return pipes (F

4. Remove the heat exchanger by sliding forward (F

1.18).

. 1.15

. 1.16);

. 1.17);

Fig. 1.16

. 1.17

. 1.18