Aeotec WallMote Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Aeotec WallMote herunter. Aeotec WallMote 8 Seiten.
Auch für Aeotec WallMote: Schnellstart (3 seiten), Benutzerhandbuch (9 seiten)
Seite drucken
4.10.2017
The WallMote Quad supports 9 association groups, all control buttons can activate the configured scenes via sending
the Central Scene Notifications to primary controller/gateway (In association group 1). In order to use Association
Groups, make sure that your gateway or software can allow you to set these (ie: Vera Group Association Setup
(https://aeotec.freshdesk.com/solution/articles/6000162165-using-wallmote-quad-with-vera-ui7)
refer to your gateways manual on setting group association. This will allow the WallMote Quad to directly communicate
ON/OFF or Dimming commands to your devices without going through your gateway.
Every control button also can send the control commands to control the devices in the other association groups, see
the table below:
Dimmer control via sliding the button area.
The WallMote Quad also supports sliding control, when the parameter 4 [1 byte] has been set to 3, you can slide up or
down on the button area to control a dimmer device by sliding up or down. Swiping up once will dim up a dimmer
device by a certain percentage, while swiping down once will dim down a dimmer device by a certain percentage.
This application is only suitable for Group Association control, it does not work with scene controls.
Your WallMote Quad's battery.
https://aeotec.freshdesk.com/support/solutions/articles/6000162392-wallmote-quad-user-guide-
WallMote Quad user guide. : Aeotec by Aeon Labs
), in order to do so, please
6/8