Aeotec WallSwipe Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller Aeotec WallSwipe herunter. Aeotec WallSwipe 5 Seiten. For nano

6x Continuous Tap

How to perform a continuous tap.

A continuous tap is a button press method used for either factory reset or unpairing your Nano from your network. To

perform a continuous tap, tap the top 50% once, then tap the bottom 50% once within 1 second).

This can be used anytime even if the Nano is paired or unpaired.

In order to perform a continuous tap, the below button tap must be done within a second:

1. Tap the top 50% of WallSwipe first

2. Then tap the bottom 50% of WallSwipe second

Control guide for Nano.

Nano Dimmer.

The LEDs on Nano Dimmer will always follow the dim level to allow you to visually track the dim level Nano Dimmer is set

to.

Button Press

Tap anywhere

Toggles OFF and last dim level.

Press and Hold then

This will dim or brighten the Nano Dimmer based

move finger to up or

on the position that you drag your finger to.

down to position

Ramps up or down Nano Dimmer (toggles

Press and hold middle

between ramp up and down), release button

position

when you find your desired dim level.

Press and hold top

Ramps up for as long as you hold it (maximum

50%

at 100%)

Press and hold bottom

Ramps down for as long as you hold it (minimum

50%

at 1%)

Factory reset Nano

Function