Aeotec Z-Pi 7 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller Aeotec Z-Pi 7 herunter. Aeotec Z-Pi 7 7 Seiten.

03/02/2021

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec

Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller

will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in

other materials.

Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure.

Z-Pi 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations.

The following will step you through using Z-Pi 7 when it is attached to a host controller (Raspberry Pi or Orange Pi

Zero) as a primary controller.

Please make sure the host controller is pre-installed; this includes any drivers that the corresponding OS may need.

1. Connect Z-Pi 7 to a host controller. The following diagrams show how to install the Z-Pi on each system.

1.1. Install Z-Pi 7 on Raspberry Pi

https://aeotec.freshdesk.com/support/solutions/articles/6000230551-z-pi-7-user-guide-

Z-PI 7 User Guide : Aeotec Help Desk

2/7