Ariston OK 997E LDP X AUS S Betriebsanleitung - Seite 19
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Backofen Ariston OK 997E LDP X AUS S herunter. Ariston OK 997E LDP X AUS S 20 Seiten.
Seite drucken
Automatic cleaning with the FAST CLEAN
function
With the FAST CLEAN mode, the internal temperature of the
oven reaches 500°C. The pyrolytic cycle is activated, burning
away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic
cleaning cycle as surfaces may become very hot. Particles
may ignite inside the oven as a result of the combustion
process. There is no cause for concern: this process is both
normal and hazard-free.
Before initiating the FAST CLEAN mode:
• clean the oven door;
• remove large or coarse food residues from the inside of
the oven using a damp sponge. Do not use detergents;
• remove all accessories and the sliding rack kit (where
present);
• do not place tea towels or pot holders over the oven
handle.
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven door
has been closed.
The desired Fast Clean mode will be confirmed and started
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time
To activate the Fast Clean programme:
1. Switch the control panel on by pressing the
2. Press the
icon; the display will show the text "Piro",
"nor" and the default duration of 1:30 h (normal cycle)
alternately.
3. Press the
icon, then turn the TIMER knob to adjust
the default cleaning level. There are 3 different levels to
choose from, each with a pre-set duration which cannot
be modified:
1. Economy (ECO): turn the knob towards "-". Duration 1
hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards "+". Duration 2
hours.
icon to confirm.
4. Press the
5. Press the
icon to begin the cleaning cycle.
An end time for the FAST CLEAN cycle (as for a normal
cooking cycle) may be programmed (see Programming the
automatic cleaning end time).
Safety devices
• the door locks automatically as soon as the temperature
reaches a high value; the
display;
• pressing the
• if a malfunction occurs, the heating elements will be
• once the oven door has been locked, you cannot change
Programming the automatic cleaning end time
1. Press the
digits on the display will begin to flash.
2. Turn the TIMER knob towards
cleaning end time value.
3. Once you have reached the desired end time, press
the
cleaning end time and the set cleaning level alternately.
4. Press the
Programming has been set when the
are illuminated.
5. Once cleaning has finished, "END" appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and the Economy (ECO)
To cancel programming press the
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
icon.
for the
temperature has dropped to an acceptable level. You will
notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge
once the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in which
case it is not necessary to remove the deposits, they are
completely harmless and will not affect your food in any way.
icon lights up on the
icon cancels the cleaning cycle at any
time;
switched off;
the duration and end time settings.
icon twice: the
icon again. The display will show the duration, the
icon to activate the programmed mode.
FAST CLEAN level has been selected, with the default
duration of 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
icon to switch off: this indicates the oven
AUS
icon and the numerical
and
to adjust the
and
buttons
icon.
19