ABB ACS850 series Handbuch zur Schnellinstallation - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Kontrolleinheit ABB ACS850 series herunter. ABB ACS850 series 16 Seiten. Drive modules, 55...160 kw, 75...200 hp
Seite drucken
Frame size E: Screw terminal installation (95 to
2
240 mm
[AWG3/0 to 500MCM] cables)
U1
V1
W1
R-
8 N·m (5.9 lbf·ft)
Input power cable
UDC+
R+ UDC-
U2
V2
PE
Motor cable
a
b
W2
a. Connect the cable to the terminal. Tighten the
Allen screw to 20...40 N·m (15...30 lbf·ft).
b. Connect the terminal to the drive. Tighten to
30...44 N·m (22...32 lbf·ft).
Wire sizes accepted by power
terminals
Drive type ACS850-04...
-103A-5, -144A-5
-166A-5...-290A-5
Tightening torques
Drive type
ACS850-04...
-103A-5, -144A-5
-166A-5...-290A-5
Quick installation guide – ACS850-04
WARNING! If the wire size is less than
2
95 mm
(3/0 AWG), a crimp lug must
be used. A cable of wire size less than
2
95 mm
(3/0 AWG) connected to this
terminal will loosen and may damage
the drive.
Wire size
6 ... 70 mm
95 ... 240 mm
Power terminals
N·m (lbf·ft)
15 (11)
Cable lug installation
30...44 (22...32)
Allen screw
20...40 (15...30)
Screw terminal installation
30...44 (22...32)
5
2
2
PE
N·m (lbf·ft)
15 (11)
8 (5.9)
8 (5.9)