Ariston MTB 45D2 NFE Handbuch für Installation und Gebrauch - Seite 15

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Gebrauch für Kühlschrank Ariston MTB 45D2 NFE herunter. Ariston MTB 45D2 NFE 29 Seiten. Two-doors

Seite drucken

Safety - a good habit to get into.

ATTENTION

Read your manual carefully since it contains instructions

which will ensure safe installation, use and maintenance of

your appliance.

Your Refrigerator is built to International safety standards

(EN60) and has been awarded the European approval mark

(IMQ) for compliance with UK electrical safety requirements.

It also meets the EC standards on the prevention and elimi-

nation of radio interference (EC directive 87/308 - 02.06.89).

1. This appliance is designed to be used indoors and under

no circumstances should it be installed outside even if

protected by a roof. Leaving the appliance exposed to the

rain and whether is very dangerous.

2. The appliance should be used only by adults and exclusively

for storing foodstuffs in compliance with the instructions

provided in this manual. Under no circumstances should

children be allowed to operate, or tamper with, this product.

3. Do not attempt to operate or handle this appliance when

barefoot, or with wet hands or feet.

4. It is highly recommended that you do not operate this

appliance by connecting it to the power supply with extensions

or multiple socket plugs. If the refrigerator has been installed

between two cabinets, make sure that the supply chord is

not dangerously crimped or trapped beneath a heavy object.

5. Never pull the cable or the appliance to remove the plug

from the socket; this is very dangerous.

Installation

Proper installation of the appliance is essential to en-

sure the best and most efficient performance of your

appliance.

Ventilation

The compressor and condenser generate heat and, there-

fore, need to be ventilated properly. Rooms with less than

perfect ventilation are not very suited for installation of the

appliance. Therefore, it should be installed in a room with

an opening (window or French window) that provides the

appropriate amount of air re-circulation. It is also important

for the room not be too humid.

During installation, make sure not to cover or obstruct the

grates that allow for proper ventilation of the appliance.

For proper ventilation of the appliance, you must leave:

- a space of at least 10 cm between the top part and any

cabinets above it;

- a space of at least 5 cm between the sides of the appliance

and any adjacent cabinets/walls.

To install the appliance between furniture units, please

follow the instructions provided on the attached sheet.

Away from Heat

Avoid positioning the appliance in a place where it is directly

exposed to sunlight or near an oven, cook top or the like.

6. Do not touch the internal cooling elements, especially if

your hands are wet, since you could burn or hurt yourself.

7. Before doing any cleaning, disconnect the appliance from

the electricity (by pulling out the plug or turning off the general

switch in your home).

8. Before disposing of your old appliance, remember to break

or remove the lock as a safety measure to protect children

who might lock themselves inside the appliance when playing.

9. If your appliance is not operating properly, read the chapter

entitled, "Trouble Shooting", which might help you resolve

the problem, before calling an after-sales service centre. Do

not attempt to repair the appliance by tampering with the

internal components.

10. If the power supply cord must be replaced, please contact

one of our Customer Service Centers. In some cases, the

connections are made using special terminals and in others a

special tool must be used to access the connections.

11. Do not use electric appliances inside the compartment

for food storage, if these are not those recommended by the

manufacturer.

12. At the end of the functional life of your appliance –

containing cyclopentane gas in the insulation foam and

perhaps gas R600a (isobutane) in the refrigeration circuit –

the latter should made safe before being sent to the dump.

For this operation, please contact your dealer or the Local

Organisation in charge of waste disposal.

Levelling

The floor should be perfectly level; if not, you can adjust the

feet at the front of the appliance.

Earthing

Before making the electrical connection, check that the volt-

age shown on the data plate, that you will find on the bot-

tom left hand side of the appliance next to the crisper, corre-

sponds to that of your home and that the socket is earthed

in compliance with all current electrical regulations. If the

system is not earthed, the manufacturer declines all liability

for consequent damages or losses. Do not use adapters or

multiple sockets.

Check the power load

The electrical socket must support the maximum power load

of the appliance shown on the data plate (on the bottom

left hand side of the appliance next to the crisper).

Before plugging the appliance to the mains

Stand the appliance upright and wait at least 3 hours before

plugging the appliance into the mains to ensure proper per-

formance.