Ariston NIO 844 DO B AUS Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Kochfeld Ariston NIO 844 DO B AUS herunter. Ariston NIO 844 DO B AUS 12 Seiten.

Seite drucken

Ariston NIO 844 DO B AUS Betriebsanleitung

will be switched off. When it is next switched on, the hob

will function normally.

Practical advice on using the appliance

! Use cookware made from materials which are compatible

with the induction principle (ferromagnetic material). We

especially recommend pans made from: cast iron,

coated steel or special stainless steel adapted for

induction. Use a magnet to test the compatibility of the

cookware.

SUITABLE

Cast iron

Enamelled steel

Special stainless steel

Ceramic, non magnetic Stainless steel

In addition, to obtain the best results from your hob:

• Use pans with a thick, flat base in order to fully utilise

the cooking zone.

• Always use pans with a diameter which is large enough

to cover the hotplate fully, in order to use all the

available heat.

• Make sure that the base of the cookware is always

clean and dry, in order to fully utilise and extend the life

of both the cooking zones and the cookware.

• Avoid using the same cookware which has been used

on gas burners: the heat concentration on gas burners

may distort the base of the pan, causing it not to

adhere correctly.

Safety devices

P a n s e n s o r

Each cooking zone is equipped with a pan sensor device.

The hotplate only emits heat when a pan with suitable

measurements for the cooking zone is placed on it. If

the power level indicator display flashes, this may be

because:

• An incompatible pan

UNSUITABLE

Copper,

Aluminium, Glass, Earthenware,

• A pan whose diameter is too small

• The pan has been removed from the hotplate.

O v e r h e a t i n g p r o t e c t i o n

If the electronic elements overheat, the hob switches off

automatically and

appears on the display, followed by a

flashing number. When the temperature has reached a

suitable level, this message disappears and the hob may

be used again.

S a f e t y s w i t c h

The appliance has a safety switch which automatically

switches the cooking zones off after they have been in

operation for a certain amount of time at a particular

power level. When the safety switch has been triggered,

the display shows "0 0 0 0 0 ".

For example: the rear right-hand hotplate is set to 5 and

will switch off after 7 and a half hours of continuous

operation, while the front left-hand hotplate is set to 2 and

will switch off after 9 and a half hours.

B u z z e r

This can also indicate several irregularities:

• An object (a pan, cutlery, etc.) has been placed on the

control panel for more than 10 seconds.

• Something has been spilt on the control panel.

• A button has been pressed for too long. All of the

above situations may cause the buzzer to sound.

Remove the cause of the malfunction to stop the

buzzer. If the cause of the problem is not removed, the

buzzer will keep sounding and the hob will switch off.

Power level

Maximum operating time in hours