Whirlpool 4KWTW5600JW1 Handbuch für Gebrauch und Pflege - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Waschmaschine Whirlpool 4KWTW5600JW1 herunter. Whirlpool 4KWTW5600JW1 40 Seiten. Top-loading high efficiency washer
Seite drucken
7.
Select soil level
Once you select a cycle, select the soil level by turning the
Soil Level knob to the desired setting.
8.
Select wash temperature
Once you select a cycle, select the wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your items.
Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cool is slightly warmer than Cold.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Tap Cold
This is the temperature
from your faucet.
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select rinse option and water level
Select the number of rinses by turning the Rinse Option knob
to the desired setting.
IMPORTANT: The Rinse Option knob must be set to an
option "with Fabric Softener" when using the fabric softener
dispenser. This ensures that fabric softener is added at the
correct time in the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and the
washer will automatically sense the appropriate water level for
the load size and type.
Set the Water Level knob to the Deep Water Wash setting and
the washer will automatically add more water to any cycle at
any time during the wash cycle.
NOTE: The cycle will be longer due to extended fill times
when using the Deep Water Wash setting.
10.
Press START/STOP/PAUSE/
UNLOCK LID to begin wash cycle
Press START/STOP/PAUSE/UNLOCK LID to start the wash
cycle. When the cycle has finished, the Done progress light
will light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and avoid rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add one or two missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle
will resume. The washer may add some additional water to
offset the added garments.
If, instead, you press START/STOP/PAUSE/UNLOCK LID to
pause the cycle and then open the lid to add garments, you
will need to press START/STOP/PAUSE/UNLOCK LID after
closing the lid to resume the cycle.
NOTE: Washer will not fill with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/STOP/
PAUSE/UNLOCK LID and leave the lid closed. Once your
desired soak time has elapsed, press START/STOP/PAUSE/
UNLOCK LID again to continue the cycle. As long as the
lid remains closed, your soak time can be longer than 10
minutes. However, if the lid is opened during the soak and
remains open for more than 10 minutes, the water will pump
out automatically.
11