Whirlpool 8578566 Handbuch für Gebrauch und Pflege - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Waschmaschine Whirlpool 8578566 herunter. Whirlpool 8578566 44 Seiten.

Seite drucken

The control panel is simple to understand and easy to operate. The illustrations below define the knobs and buttons, and the

paragraphs define the purpose of each.

Power

This button switches the power to the machine on and off. After

Power is pressed, the Start button will flash.

Cycle Knob

Turn this knob to the desired cycle. The table in the Cycles

section defines each cycle in detail, so you can determine which

cycle is best for each type of load.

Stop Position

If you turn the Cycle Knob to Stop to interrupt a cycle, to add an

item or to cancel a cycle, there will be a 2-minute delay before the

door lock will release and you can open the door. To restart the

machine, you will have to reposition the Cycle Knob and press

the START button.

NOTE: Before the cycle will start, the machine will drain any

water already in the machine. Before you press START, it is a

good idea to make sure you do not need to add more detergent.

Status Lights

As the cycle progresses, the light for the cycle in progress will

glow. The Done indicator light glows when the cycle is complete.

At this point, there will be a 2-minute delay before the door lock

will release and you can open the door.

Controls

Spin Speed Knob

Use this knob to set the spin speed. In addition to the Low,

Medium, High and Extra High spin speeds, there is a No Spin

option. This is for delicate fabrics that should not be spun dry.

Extra Rinse Button

This button sets the cycle to add more rinsing. The button will

glow when this option is on. See "Cycles" for an explanation of

whether the rinse cycle can be added to each cycle. The regular

rinse cycle is usually sufficient, but if you live in an area with very

soft water or you are allergic to detergent, you may want to use

this option. This option is not available with Quick Wash or Spin.

Pre Wash

Press this button to select a Pre Wash. This is recommended only

for heavily soiled items. The button will glow when this option is

on. If you use Pre Wash, be sure to put detergent in the Pre Wash

compartment of the detergent drawer.

NOTE: Pre Wash cannot be selected for the Hand Wash, Quick

Wash or Spin cycles.

Start Button

After you have selected a cycle and options (Pre Wash or Extra

Rinse), press this button to start the cycle. The button will glow.

NOTE: A short time delay, up to a few minutes, may occur before

the wash cycle begins. This is a normal function of this washer.