Whirlpool AWE 9723 Programm Chart - Seite 2

Blättern Sie online oder laden Sie pdf Programm Chart für Waschmaschine Whirlpool AWE 9723 herunter. Whirlpool AWE 9723 2 Seiten.

Seite drucken

CONSUMPTION DATA

Temperature Selector

Programme

(°C)

Cotton

90/40

Cotton

Cotton with Eco plus***

Daily Mixed

Synthetics

60/40

Rapid Plus

Delicates

Wool

Handwash

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the

table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

***Reference Programme for Energy Label

PREPARATION OF WASH CYCLE

1. Close the drum door flaps and check that they are

properly locked.

2. Add detergents and additives into the dispenser to

no more then the "MAX" level mark, as follows:

•

Programme with pre and main wash

•

Main wash programme without prewash

•

Fabric softeners and conditioners

•

Chlorine bleach

•

Stain remover agents

•

Anti-scale agents (if necessary)

3. Turn the programme selector knob to the

desired programme.

The remaining time of the chosen programme is

shown in the display (in hours and minutes) and

the indicator light of the "Start/Pause" button

flashes.

The predefefined temperature & spin speed

corresponding to the selected programme are

indicated in the display. The temperature (+/-)

and spin speed

can be changed by pressing

the corresponding button.

SELECT THE DESIRED OPTION

When you select an option authorized by the

programme, the corresponding indicator lights up,

except if the combination of programme,

additional options and temperature is not possible.

Load

Water

Energy

Approx. Programme

Duration

(kg)

(l)

(kWh)

(hours : minutes)*

5.0

49**/48

1.60/0.60

2:05/2:00

5.0

0.95

5.0

0.85

3.0

0.45

2.0

55/50

0.70/0.50

1:30/1:15

3.0

0.40

1.5

0.50

1.0

0.50

1.0

0.40

"Easy Ironing" button

• Can be used together with "Cotton", "Synthetic" and

"Daily Mixed" programmes to make ironing easier.

• Increases the water quantity in rinsing and the

clothes are spun in a softer manner.

"Eco plus" button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption can be achieved.

"Prewash" button

• Only for heavily soiled loads (for example mud,

granular dirt).

"Intensive Rinse" button

• The amount of water is increased to ensure a

more intensive rinse.

• This option is particularly suitable for areas with

very soft water or washing linen laundry for

people with skin allergies.

"Rinse Hold" button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to avoid

creasing from fading.

• This option is particularly recommended for the

"Synthetic", "Delicate" and "Daily Mixed"

programmes.

• Use this option if you want to postpone spinning

to a later time, or if you want to drain only.

Note: The programme with "Rinse Hold" stops

when the "Rinse Hold"

display.

Appliance in "Rinse Hold":

• If you want to continue the programme press

the "Start/Pause" button again: The

programme will terminate automatically with

2:05

the selected spin cycle. If the load is dry then

2:10

please press the "Start/Pause" button.

1:00

• If you do not wish to spin the load, turn the

programme selector knob to the "Drain"

programme and press the "Start/Pause" button.

0:30

"Spin Speed Reduction" button

0:45

• Every programme has an automatically allocated

0:45

maximum spin speed.

0:35

• Press the button

until you have reached the

requested spin speed indicated in the display.

• If the spin speed "0" is selected, the final spin is

cancelled, but not the intermediate spins. The

programme ends with a drain cycle.

START DELAY

The "Start Delay" button

the appliance at his convenience, for example at

night when electricity is cheaper.

• Select programme, temperature and options.

• Press the "Start Delay" button several times to

select the delay time by 1 to 24 hours (selected

delay is indicated in display);

• Press the "Start/Pause" button. The indicator

light of the "Start/Pause" button lights up, the

lamp of the "Start Delay" button flashes and the

selected delay is indicated in the display.

• The time delay indication disappears when the

programme starts and is replaced by the

remaining time.

• The number of hours preselected can be reduced

later by pressing the "Start Delay" button again.

To cancel the pre-selected "Start Delay"

• Turn the programme selector to the "

position.

• Reselect the desired programme and options

and press the "Start/Pause" button.

PROGRAMME START

Open the tap and press the "Start/Pause" button.

The indicator light of the "Start/Pause" button lights

up. At programme start the sequences reached by the

programme are indicated in the display.

Note: If there's a power cut during the cycle, the

programme will continue automatically from where

it was interrupted.

LID LOCK

is indicated in the

For safety reasons, the lid is locked during certain

phases of the cycle. At the end of the cycle or

during an interruption, the lid unlocks automatically

after about 1 minute.

END OF WASH CYCLE

• Upon programme end "

the display.

1. Turn the programme selector to the "

2. Close the tap.

3. Open the lid and the door flaps and unload the

appliance.

CHANGE THE PROGRAMME OR OPTIONS

DURING THE CYCLE

Press "Start/Pause" button. Select new programme

and/or new options, temperature and spin speed and

press "Start/Pause" button again. The new

programme will continue at the same position where

the previous programme was interrupted. Do not add

detergent for this programme.

allows the user to run

Note: The "Start Delay" and "Prewash" cannot be

selected after a programme change.

PAUSE/INTERRUPT A PROGRAMME

If, for adding some forgotten pieces of clothing or any

other reasons, you wish to interrupt or pause the

programme for a certain time and continue it later:

1. Press the "Start/Pause" button.

The light flashes.

2. After the desired pause, press again on the

"Start/Pause" button.

CANCEL PROGRAMME

To cancel a programme please press Reset button

for 3 seconds.

Note: After power cuts or disconnection from the

mains after programme end, the LCD display may

show the previously selected settings. In this case

we suggest to check laundry's humidity in drum.

If laundry is damp, the cycle finished properly.

Unload the drum and press Reset Button for

3 seconds before selecting a new cycle for

next laundry.

Whirlpool is a registered trademark of Whirlpool USA

" is shown in

" position.

5019 312 10276