Ariston Washer Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Handbuch für Trockner Ariston Washer herunter. Ariston Washer 44 Seiten.

Installation Instructions

Exhaust ducting

The ducting system for the dryer must be as short and
straight as possible and with as few elbows as possible.
Four-inch (102mm in Canada) rigid metal ducting
should be used, metal flexible ducting can be used
but the maximum length of ducting if used is 7ft
(2.4m) and provided it complies with the following:
In Canada, that only those foil-type flexible ducts, if
any, specifically identified for use with the appliance
by the manufacturer shall be used.
In the United States, that only those foil-type flexible
ducts, if any, specifically identified for use with the
appliance by the manufacturer and that comply with
the Outline for Clothes Dryer Transition Duct, Subject
2158A, shall be used.
Never use plastic ducting. All elbows must also be a
minimum of 4-inch (102mm) diameter. Joints must be
secured with ducting tape. Do not use screws or
other metal fastenings that extend into the duct, as lint
can collect on the screws.
Maximum length of rigid duct:
Number
Rigid Duct (only)
of Elbows:
0
22 ft. (6.6m)
1
18 ft. (5.4m)
2
14 ft. (4.2m)
3
6 ft. (1.8m)
The above assumes that an approved venting hood is
used and that the flap on this hood must not have
magnetic catches.
WARNING:
- The appliance MUST NOT be exhausted into a
chimney, a wall, a ceiling, an attic, a crawl space
or a concealed space of a building.
- To reduce the risk of fire, this appliance MUST BE
EXHAUSTED OUTDOORS.
- Do not discharge the exhaust air into a flue, which
is used for exhausting fumes from other appliances
burning gas or other fuel.
Depending on the frequency of use it is essential that
the ducting is checked periodically and any fluff or
debris removed.

Stacking kit

A stacking kit is available from your dealer, which
allows the dryer to be fitted to the top of an Ariston
washing machine.
Reference number:
66911 White for TVF63X or
66913 Silver for TVF63XS
The kit contains all the necessary brackets and screws.
Tools needed:
No.2 Philips Screwdriver
2mm drill, power or hand drill
SAFETY
For personal safety, DO NOT try to fit the dryer on
top of the washing machine on your own. A second
person should help to lift the tumble dryer onto the
washing machine and to relocate the stacked
washer and dryer.
1. You will need to get to the sides of the washing
machine to fit the stacking kit and dryer. If necessary
pull the machine away from its location to gain
access to the machine to fit the stacking kit and
dryer.
2. Follow the instructions provided with the stacking
kit.
EN
15