Whirlpool WSR25D2RYY00 Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kühlschrank Whirlpool WSR25D2RYY00 herunter. Whirlpool WSR25D2RYY00 29 Seiten.

Seite drucken

Replace the bin by pushing it in all the way or the dispenser

will not work.

To restart ice production,

push the wire shutoff arm down to

the ON position. Make sure the door is closed tightly.

Do not use with water that is microbiologically

unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

Water Filter Status Light (on some models)

The filter status light will help you know when to change your

water filter.

•

The light will change from green to yellow. This tells you that it

is almost time to change the filter.

•

It is recommended

that you replace the filter when the status

light changes to red OR water flow to your water dispenser or

ice maker decreases noticeably.

The filter should be replaced at least every 6 months depending

on your water quality and usage.

•

After changing the filter, reset the filter status light by pressing

the button. The status light will change from red to green when

the system is reset.

Non-Indicator Water Filter (on some models)

If your refrigerator does not have the water filter status light, you

should change the water filter cartridge at least every 6 months

depending on your water quality and usage. If the water flow to

the water dispenser or ice maker decreases noticeably before

6 months have passed, replace the water filter more often.

Changing the Water Filter

1. Locate the water filter cover door in the base grille, and pull

open the filter door. The filter will be released and then eject as

the door is opened.

2. When the door is completely open, pull the filter straight out.

NOTE: There may be some water in the filter. Some spilling

may occur. Use a towel to wipe up any spills.

Take the new filter out of its packaging and remove the covers

from the O-rings. Be sure the O-rings are still in place after the

covers are removed.

With the arrow pointing to the left (toward the filter cover

door's hinge), align the new filter with the filter housing and

slide it into place. The filter cover door will automatically begin

to close as the new filter is inserted.

5. Close the filter cover door completely in order to snap the filter

into place. You may need to press hard.

6. Flush the water system. See "Water and Ice Dispensers."

REFRIGERATOR C ARE

Explosion Hazard

Use nonflammable

cleaner.

Failure to do so can result in death, explosion,

or fire.

Both the refrigerator and freezer sections defrost automatically.

However, clean both sections about once a month to avoid

buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any

odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To avoid odor

transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes,

concentrated

detergents, bleaches or cleansers containing

petroleum products on plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or other harsh

cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

3. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water.

4. There is no need for routine condenser cleaning in normal

home operating environments.

If the environment is

particularly greasy or dusty, or there is significant

pet traffic in

the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency.

If you need to clean the condenser:

•

Remove the base grille. See the "Door Removal"

instructions, either in the User Instructions or the separate

instruction sheet provided with your refrigerator.

•

Use a vacuum cleaner with a soft brush to clean the grille,

the open areas behind the grille and the front surface area

of the condenser.

•

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.