Whirlpool 27' Installationsanleitung Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Trockner Whirlpool 27' herunter. Whirlpool 27' 32 Seiten. Microwave oven and thermal oven
Auch für Whirlpool 27': Arbeitshilfe (36 seiten), Installationsanleitung Handbuch (11 seiten), Installationsanleitung Handbuch (11 seiten), Installationsanleitung Handbuch (48 seiten), Installationsanleitung Handbuch (22 seiten), Installationsanleitung Handbuch (27 seiten), Installationsanleitung Handbuch (12 seiten), Einbauanleitung (5 seiten)

Seite drucken

Whirlpool 27' Installationsanleitung Handbuch

3-Wire Cable from Home Power Supply - U.S. Only

IMPORTANT: Use the 3-wire cable from home power supply

where local codes permit a 3-wire connection.

A. Cable from home power supply

B. Junction box

C. Black wires

D. White wires

E. Green (or bare) ground wire

(from oven)

1. Connect the 2 black wires (C) together using a UL listed wire

connector.

2. Connect the 2 white wires (D) and the green (or bare) ground

wire (of the oven cable) using a UL listed wire connector.

3. Connect the 2 red wires (G) together using a UL listed wire

connector.

4. Install junction box cover.

Install Oven

1. Using 2 or more people, lift the oven partially into the cabinet

cutout. Use the oven opening as an area to grip.

NOTE: Push against seal area of the oven front frame when

pushing the oven into the cabinet. Do not push against the

outside edges.

F. 4-wire flexible conduit from

oven

G. Red wires

H. UL listed wire connectors

I. UL listed or CSA approved

conduit connector

2. Push against the seal area of the front frame to push the oven

into the cabinet until the back surface of the front frame

touches the front wall of the cabinet.

3. Push oven completely into the cabinet and center the oven

into the cabinet cutout.

NOTE: If you have model KEBK171B, KEBK101B,

KEBK276B, KEBK206B, KEBS179B, KEBS109B, KEBS277B,

KEBS279B, KEBS207B or KEBS209B, proceed to Step 6.

4. Insert the grommet into the mounting rail hole using a flat-

blade screwdriver. Insert the screwdriver into the grommet

and turn ¹⁄₄ turn counterclockwise. Make sure the grommet

stays in position.

IMPORTANT: If the grommet is not installed, the front frame

will be damaged.

A. Mounting rail

B. Mounting rail hole

C. Grommet

5. Securely fasten oven to cabinet using the # 8-14 x ¾" screws

provided. Insert the screws through hole in the grommet. Do

not overtighten screws.