Whirlpool 29" Wide Models Installationsanleitung Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Trockner Whirlpool 29" Wide Models herunter. Whirlpool 29" Wide Models 48 Seiten. Dryer
Auch für Whirlpool 29" Wide Models: Installationsanleitung Handbuch (20 seiten), Installationsanleitung Handbuch (22 seiten)

Seite drucken

Attach long hose to "Y"

connector and tighten couplings

Attach dryer 5 ft (1.5 m) inlet hose ends to the "Y" connector.

Attach washer cold inlet hose to other side of "Y" connector.

Screw on coupling by hand until it is seated on connector.

Using pliers, tighten the couplings an additional two-thirds

turn.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach long hose to dryer fill

valve and tighten coupling

Attach other end of long hose to

fill valve at top of dryer back panel.

Screw on coupling by hand until

it is seated on fill valve connector.

Using pliers, tighten the coupling

an additional two-thirds turn.

NOTE: Do not overtighten. Damage

to the coupling can result.

Turn on cold water faucet

Check that the water faucet is turned on.

(768 mm)

(101 mm)

Check for leaks

Check for leaks around "Y" connector, faucet, and hoses.

Connect Vent

Connect vent to exhaust outlet

Using a 4" (102 mm) clamp, connect vent to exhaust outlet

in dryer. If connecting to existing vent, make sure vent is

clean. Dryer vent must fit over dryer exhaust outlet and inside

exhaust hood. Check that vent is secured to exhaust hood

with a 4" (102 mm) clamp.

Move dryer to final location

Move dryer to final location. Avoid crushing or kinking vent.