Whirlpool 8535839 Handbuch für Gebrauch und Pflege - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Trockner Whirlpool 8535839 herunter. Whirlpool 8535839 28 Seiten. Resource saver electric and gas dryers

Seite drucken

Loading

Load clothes loosely into the dryer. Do not pack the dryer. Allow

space for clothes to tumble freely. The following chart shows

examples of balanced loads that would allow for proper tumbling.

3 pair of pants, 4 pair of jeans,

Heavy work

clothes

2 pair of overalls, 3 shirts

Delicates

3 camisoles, 1 robe, 4 slips,

6 undergarments, 2 sets of sleepwear,

1 child's outfit

Towels

10 bath towels, 10 hand towels,

14 washcloths, 1 bath mat

Mixed Load

3 double sheets, 4 pillowcases,

8 T-shirts, 6 pair of shorts, 2 blouses,

8 handkerchiefs

Drying, Cycle and Temperature Tips

Select the correct cycle and temperature for your load.

Cool Down tumbles the load without heat during the last few

minutes of all cycles to make the load easier to handle.

Drying tips

Follow care label directions when they are available.

If you use fabric softener sheets, use only those labeled

"dryer safe." Follow package instructions.

Remove the load from the dryer as soon as tumbling stops to

reduce wrinkling. This is especially important for permanent

press, knits, and synthetic fabrics.

Cycle tips

Use the Energy Preferred Setting with the RESOURCE

SAVER™ temperature setting to save the most energy while

drying average size loads of lightweight to medium weight

items.

Use the Very Dry setting with the RESOURCE SAVER™

temperature setting to save energy while drying larger loads

of medium weight to heavyweight items.

Temperature tips

Use a High heat setting for drying heavyweight items such as

towels and work clothes.

Use a Medium heat setting for drying medium weight items

such as sheets, underwear, permanent press fabrics, and

some knits.

Use a Low heat setting for drying lightweight items such as

lingerie, blouses, dresses, and some knits.

Use a no heat (air) setting for rubber, plastic, or heat-sensitive

fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions. If you are unsure

of the temperature to select for a load, select the lower setting

rather than the higher setting.

CYCLES

Your new RESOURCE SAVER™ dryer uses the Temperature

selector with the Cycle Control knob to design a drying cycle to

provide the shortest, most efficient drying time and best fabric

care for your load.

Cycle Control knob

ACCUDRY™ Automatic Drying Cycle

The automatic cycle uses the ACCUDRY™ electronic control

sensor that senses the moisture in your load and shuts off the

dryer when the selected dryness is reached. The Cycle Control

knob does not move until the load is almost dry. After the cool

down, the knob automatically turns to an Off area and tumbling

stops.

Your most frequently used Temperature settings, Normal and

High, when used with the automatic cycle, are enhanced with the

SENSEON™ drying system to provide the shortest drying time.

See "Temperature Settings."

Dry most loads using the Energy Preferred Setting.

If the load is drier than you like, select a setting closer to

Less Dry the next time you dry a similar load.

If the load is not as dry as you like, complete drying using the

Timed Drying cycle. Select a setting closer to Very Dry the

next time you dry a similar load.

Towels

Select this setting to thoroughly dry extra heavy items, such as

mattress pads and quilts or a load of towels. Set the Temperature

selector to High heat.

Delicates

Use this setting to dry small loads or lightweight items. Set the

Temperature selector at Low or Ex-Low heat.

NOTE: Drying time varies with an automatic cycle. The type of

fabric, size of the load, and the dryness selected affect drying

time. See "Drying, Cycle and Temperature Tips."