Whirlpool AWD60A Service-Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Service-Handbuch für Trockner Whirlpool AWD60A herunter. Whirlpool AWD60A 22 Seiten. Tumble dryer
Auch für Whirlpool AWD60A: Betriebshandbuch (32 seiten), Betriebshandbuch (16 seiten)
Seite drucken
RACK FITTING INSTRUCTIONS
RACK STORAGE - DRYER INVERTED.
To hold the drying rack out of the way
when not in use, it will be necessary to
attach the retaining clips to the base of
your dryer.
To do this, firstly remove the screw located
4 cm from the right corner of the inverted
dryer (Fig. 3).
Then position the retaining clip over the
hole so that the prong on the clip is near
the cabinet corner and faces outwards
(Fig. 4).
Fasten the clip using the same screw. Repeat this on the left side.
Fit drying rack to its cabinet mountings. Tilt rack upwards and align retaining clip until rack
frame " snaps " into the prongs of the retaining clip (Fig. 4).
LOADING DRYER RACK.
To make use of the drying rack, firstly rotate
the outlet grill so that the louvres point
towards the rack.
Place items to be dried at the centre of the
rack for best airflow.
Shoes should be placed upside down.
A large woollen article e.g. a cardigan, should
be placed over the whole rack, and to ensure
more even drying will need rearranging from
time to time.
Caution:
1. The maximum weight placed on the dryer rack should not exceed 1 kg.
2. Make sure the clothes are suitable for the dryer rack.
3. As the exhaust air temperature rises at the end of a normal drying cycle, it is important that
you regularly check items on the rack to make sure they are not overheated.
Tumble Dryer
Remove
screw
Retaining
clip
Drying
rack
Page 8
Model:AWD60A
Fig. 3.
Fig. 4.