Whirlpool AWZ 8CDS/DF Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Trockner Whirlpool AWZ 8CDS/DF herunter. Whirlpool AWZ 8CDS/DF 4 Seiten.

Seite drucken

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

TROUBLESHOOTING

In order to receive a more complete assistance, please

Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in few

minutes.

Malfunction

Possible cause

The plug is not inserted into the socket.

The tumble

The plug is faulty.

dryer does not

turn on.

A power failure occurred.

The door has not been closed properly.

A time delay was set to the start of the cycle.

The tumble

dryer does not

The "Start/Pause" button was not pressed in

start.

order to start the programme.

The Key Lock function was enabled (for machines

equipped with this option).

Small load.

Garments are

wet at cycle

completion.

Large loads or heavier fabrics.

An appropriate maintenance was not carried out. Refer to the Care & Maintenace section and perform the operations

The programme, the time and/or the drying level

set are not suitable for the type and the amount

The drying

of load inserted into the dryer.

times are very

long.

The garments are too wet.

The dryer may be overloaded.

The programme

A power failure occurred might have occurred.

did not end.

Lights on or fl ashing

Water tank

The water tank is full.

Failure of the air fl ow necessary for machine

Door fi lter

operation.

Bottom fi lter*

The bottom fi lter requires cleaning.

DEMO

The dryer is in DEMO mode. The DEMO indicator

The cycle lasts

is on.

few minutes.

The presence

of wrench

The machine sensors detected a failure.

symbol signals a

malfunction.

*Note: some models are auto-cleaning and not equipped with bottom fi lter. Please refer to the Care & Maintenance section.

Policies, standard documentation, ordering of spare parts and additional product information can be

found by:

• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.

Before using the appliance carefully read the Safety

Instructions.

Solution

Insert the plug into the socket.

Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, such as adapters or

extensions.

Wait for the power supply to be restored and switch the fuse on again

if necessary.

Close the door.

For machines equipped with this function: wait for the set delay to

end or switch the machine off to reset it. Refer to the Options section.

Press the "Start/Pause" button.

Refer to the Options section. If Key Lock was selected, disable it.

Switching the machine off will not disable this option.

The automatic programme has not sensed the required fi nal moisture

so that the dryer completes the programme and stops. If this happens

simply select an additional short period of drying or select Extra Dry

option if available.

Dryness levels can be modifi ed to the specifi c dryness desired.

Extra Dry is recommended for ready to wear items.

described.

Refer to Programmes and Options sections to fi nd the programme

and options most suitable for the type of load..

Carry out a washing cycle with higher spin speed to remove as much

water as possible.

Refer to the Programmes section to check the max load for each

programme.

In case of power failure, it is necessary to press the "Start/Pause"

button to restart the cycle

Empty the water tank. Refer to the Care & Maintenance section

Clean the door fi lter and check whether air intake is free. Carrying

out these operations improperly may cause damages. Refer to Care &

Maintenance section.

Clean the bottom fi lter. Refer to Care & Maintenance section.

Disable the DEMO mode. The following actions must be carried out in

sequence, without breaks. Switch the machine on and then switch it off

again. Press the Start/Pause button until the buzzer is heard. Switch the

machine on again. The "DEMO" indicator fl ashes and then turns off .

Switch the dryer off and unplug it. Open the door immediately and

pull laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits fl ashing on the display.

For instance: F3 and E2.

xxxx

xxxxxxxxxxxx