Whirlpool Cabrio,- WED7300X Handbuch für Gebrauch und Pflege - Seite 8

Seite drucken

Whirlpool Cabrio,- WED7300X Handbuch für Gebrauch und Pflege

10. Select Delay Wash, if desired (on some models). See "Delay

Wash" in the "Modifiers" section.

11. Press START. The wash cycle begins, and the display shows

the estimated remaining time. The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing

Power, the washer automatically shuts off.

Turn the knob to choose the right wash cycle for the type of

fabrics you are washing. When the knob points to a cycle, the

indicator light for the cycle will glow and the indicator light for

Start will blink. If the default settings for the Modifiers and Options

are acceptable, you may press Start to begin the wash cycle.

Preset Cycle Settings

For ease of use, preset cycle settings provide the recommended

fabric care settings for each cycle.

To use the preset cycle settings:

1. Press POWER.

2. Select the cycle you want by turning the knob. The preset

cycle settings will be displayed (see the following chart).

NOTE: The preset cycle times may vary slightly depending on

your model.

3. Press START. The wash cycle will begin.

Preset Cycle Settings

Cycle

Preset

Minutes*

Whitest Whites

Heavy Duty

Bulky Items/

Comforters

Sheets

Normal

Casual/Perm Press

Colors/Towels

Quick Wash

Wool

Delicate/Handwash

Soak

Cycles

Soil

Wash/

Level**

Rinse Temp

Heavy

Hot/Cold

Heavy

Hot/Cold

Normal

Warm/Cold

Normal

Warm/Cold

Normal

Warm/Cold

Medium

Warm/Cold

Normal

Cold/Cold

Light

Warm/Warm

Light

Warm/Cold

Light

Cold/Cold

Medium

Warm/Cold

Cycle

Preset

Minutes*

Rinse & Spin

Drain & Spin

Clean Washer

*These times are for reference only and may not match your

model exactly.

**Cycle time in minutes will appear in the display while you are

making selections. The total cycle time will appear, including an

estimated time for drain and fill times, once Start is pressed.

NOTE: Load only to the top of the basket. Overloading can cause

poor cleaning. See "Starting Your Washer."

Whitest Whites

This cycle introduces liquid chlorine bleach to the load at the

proper time for improved whitening of your heavily soiled white

fabrics. Cycle combines high-speed wash action and high-speed

spin speed. For maximum soil and stain removal, liquid chlorine

bleach must be used.

Heavy Duty

Use this cycle for heavily soiled or sturdy items. Cycle combines

high-speed wash action and high-speed spin. Deep Clean and

Spray Rinse are the default options for this cycle, but they can be

turned off. See "Changing Cycles, Modifiers, and Options."

Bulky Items/Comforters

Use this cycle to wash large items such as comforters, pillows,

and sleeping bags. This cycle starts with a soak to thoroughly

saturate your large load. This is followed by medium wash action

and medium spin speeds to maintain load balance.

Sheets

Use this cycle for sheets, pillowcases, and blankets. The wash

action of this cycle is designed to keep large items from tangling

and balling up.

IMPORTANT: For best performance, drop items in loose heaps

evenly around the basket wall. Do not load items directly on the

impeller for this cycle.

Normal

Use this cycle for normally soiled cottons and mixed fabric loads.

Cycle combines high-speed wash action and high-speed spin.

Spray Rinse is the default option for this cycle, but it may be

turned off.

Casual/Perm Press

Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press, and

blends. This cycle uses medium-speed wash action, a low-speed

spin, and a cool down process to reduce wrinkling.

Colors/Towels

Use this cycle for lightly soiled, colored clothing, or towels. This

cycle uses low to medium-speed wash action and high-speed

spin. For best results, use cold or warm water.

Soil

Wash/

Level**

Rinse Temp

Not

Cold/Cold

applicable

Not

applicable

Not

applicable