Whirlpool Cabrio,- WED7300X Handbuch für Gebrauch und Pflege - Seite 16

Seite drucken

Whirlpool Cabrio,- WED7300X Handbuch für Gebrauch und Pflege

Troubleshooting

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help -

If you experience

Washer not performing as expected (cont.)

Washer not draining/

spinning, loads are

still wet (cont.)

Incorrect or wrong wash

or rinse temperatures

Load not rinsed

Sand, pet hair, lint, etc.

on load after washing

Load is tangling

Not cleaning or

removing stains

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

Possible Causes

Not using HE detergent or using too

much HE detergent.

Check for proper water supply.

Energy-saving controlled wash

temperatures.

Check for proper water supply.

Not using HE detergent or using too

much HE detergent.

Washer may be tightly packed.

Heavy sand, pet hair, lint, and

detergent or bleach residues may

require additional rinsing.

Washer not loaded as recommended. Load items in loose heaps evenly around the washplate.

Wash action and/or spin speed too

fast for load.

Wash load not completely

covered in water.

Added more water to washer.

Washer not loaded as recommended. Load items in loose heaps evenly around the washplate.

Suds from regular detergent or using too much detergent can

slow or stop draining or spinning. Use only HE detergent. Always

measure and follow detergent directions for your load. To remove

extra suds, Select RINSE & SPIN. Do not add detergent.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and

have both hot and cold water owing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

ENERGY STAR

quali ed washers use cooler wash and rinse

water temperatures than traditional top-load washers. This

includes cooler hot and warm washes.

Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water owing to the inlet

valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

The suds from regular detergent can cause the washer to

operate incorrectly.

Use only HE detergent. Be sure to measure correctly.

Always measure detergent and follow detergent directions based

on load size and soil level.

The washer is less ef cient at rinsing when load is tightly packed.

Load items in loose heaps evenly around the washplate. Do not

load items directly over the center of the washplate.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional items after washer has started.

Add an Extra Rinse to the selected cycle.

Reduce tangling by mixing types of load items. Use the

recommended cycle for the type of items being washed.

Select a cycle with a slower wash action and slower spin speed.

Note that items will be wetter than when using a higher speed spin.

Washer senses load size and adds correct amount of water. This

is normal and necessary for clothes to move.

Do not add more water to washer. Adding water lifts the items off

the washplate, resulting in less effective cleaning.

Add only 1 or 2 additional items after washer has started.

Solution